Crosley Dryer Handles

Your Price

$38.66

Crosley Dryer Door Handle - White

★★★★★

316 Reviews

PartSelect Number PS11731583

Manufacturer Part Number W10861225

This white OEM dryer door handle is used to open and close the dryer's door. Comprised of plastic and 6-by-2-inches in dimension, the handle is sold individually and attaches to the dryer door. Your dryer door may need replacing if you've accidentally pulled too hard on the door handle in opening. This will be more likely to happen over time as the material weakens through frequent use. If your handle is broken, you may no longer be able to open or close your dryer door, depending on the position your handle broke in. You'll know you need to replace this part if the locking tab has broken off, causing the handle to continually fall out.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Dawn from AUSTIN, TX

The handle to the dryer broke.

Replacement handle snapped in place very easily. Read more...

Videos!

Your Price

$58.09

Crosley Dryer Door Handle

★★★★★

17 Reviews

PartSelect Number PS2330842

Manufacturer Part Number 134412860

Handle ONLY.

Fixes these symptoms

Door won’t close
Lid or door won’t close
See more...

Installation Instructions

High Hope Employment Service from Milan, MO

The handle to the door had been broken.

We had to remove the screws and take the door off the washing machine then the door glass ring. Replace and put it back on. It was really easy and save alot in repair bills. Read more...

Your Price

$16.76

Crosley Dryer Door Handle

★★★★★

2 Reviews

PartSelect Number PS11743752

Manufacturer Part Number WP686711

White in color.

Your Price

$48.44

Crosley Dryer Door Handle

★★★★★

7 Reviews

PartSelect Number PS418388

Manufacturer Part Number 131644700

This part is the replacement door handle for your dryer. It is made of white plastic and measures about 2 ½ inches long and 4 inches wide. The door handle allows you to open and close the dryer door. If it is cracked, damaged, or missing, this is the part that will replace it. Many of our customers rated this repair easy, as the new handle should simply snap into place. This is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Door won’t close
See more...

Installation Instructions

Kevin from Cedar Rapids, IA

Knobs & Handle Broken

Did repairs by hand, took longer to open box and remove packaging that to install the parts. Total time from mail box to repair complete- 3 Minutes. Read more...

Videos!

Your Price

$49.25

Crosley Dryer Door Handle - White

★★★★★

3 Reviews

PartSelect Number PS11741690

Manufacturer Part Number WP3405184

This is a door handle for the door of your dryer. It fastens to your appliance in order to allow you an easy way to firmly pull and push the door open and closed. The most common reason for needing to replace this part is if your current one has warped over time and may be broken. This part is just over 5 inches long, and 2.5 inches wide.

Installation Instructions

steve from carol stream, IL

over-all different problems with esate.

Very easy to replace. Read more...

Your Price

$7.97

Crosley Dryer Door Handle - White

★★★★★

10 Reviews

PartSelect Number PS11756180

Manufacturer Part Number WPW10549553

White in color.

Installation Instructions

William from TUCSON, AZ

Dryer handles broke

Put new part in slot and pushed Read more...

Your Price

$55.97

Crosley Dryer Door Handle

★★★★★

1 Review

PartSelect Number PS11741770

Manufacturer Part Number WP348721

White in color.

Installation Instructions

Chris from Worcester, MA

Motor tried, but could not turn drum

First, I unplugged it and pulled it away from the wall. Then I pryed the front of the top up. It is scary to apply that much force, but the clips did not break. It opens like a car hood. Then I removed the two sheet metal screws that hold the front to the sides. Don't forget to unplug and unclip the door switch wires. Then I lifted the front off the bottom clips. Be sure to hold the drum up when you do this. Three hands will make it easier. Then remove the drum and belt. The belt tensioner will fall off, but that is ok.

I thought the problem would turn out to be the motor, but instead it was the front seal for the drum. It is felt and had broken. It folded under itself and was jamming the drum to the point that the motor couldn't turn it.

I replaced the felt seal, which attaches to the front cover with three clips and also replaced the plastic guides, which clip to the drum. Both were easy to do. I had replaced the rear drum seal a few years ago and so it was ok, otherwise I would recommend doing that too.

While I had it apart, I opened up the back and cleaned out all the lint in the fan housing. I had replaced the heater element, thermal switch and fuse a few years ago, so they were fine.

I also replaced the mosture sensor, just because it only cost $11. I bought a new lint filter, because it had holes in it after 20 years. I replaced the belt, because it was only $10. I replaced the lint filter cover and front door handle, because they had yellowed. I will warn you about the front door handle. It was a bear. I finally had to take the door apart to get the little plastic clip to seat correctly.

Then I put it all back together, which again is easier with 3 hands. Holding up the drum and putting the front cover on the lower clips can be a bit tricky alone. Also, be sure to rotate the drum to make sure the rear seal is not folded under and the front seal is seated correclty.

I fired it up and it ran great, except for the constant whistling. I had wondered what the little clear plastic box in the back did. Turns out it is the lint filter is full whistle warning thing. I took the back off again and found a wire was resting on the flapper door of the box and holding it in the wrong postion. By the way, it is a really irritating sound after the first few minutes. I moved the wire and it works great.

I worked slowly and it went well and was not hard. Read more...