General Electric Air Conditioner Circuit Boards and Touch Pads

Your Price

$221.76

General Electric Air Conditioner Electronic Control Board

★★★★★

1 Review

PartSelect Number PS12337401

Manufacturer Part Number WP26X22240

Your Price

$158.92

General Electric Air Conditioner Electronic Control Board

PartSelect Number PS8757489

Manufacturer Part Number WJ29X10053

The electronic control board manages the operations of the room air conditioner like temperature and fan speed.

Your Price

$213.07

General Electric Air Conditioner Main Switch

★★★★★

1 Review

PartSelect Number PS282095

Manufacturer Part Number WP28X56

Installation Instructions

JEANIE from LAQUEY, MO

Appliance would not shut off- heated or cooled just fine but never turned off.

Turn off the circuit breaker. 1- Removed cover- (clips on both sides of bottom front pop loose and carefully lift off) 2. Remove knobs. Unscrew the lock washer on the switch pegs 3. Unscrew all visible screws approx 4 in front and 2 on the side 4. This will allow you to jar the aluminum box loose from the top- it does not come off completely. 5. Carefully locate the switch-circuit board behind the left knob. 6. Unplug both lines- insert new part (main switch) connect both lines into the new part. 7. Replace the box just as you took it apart. 8. Make sure the knob pegs are turned all the way to the left. Reinstall lock washer. Then align knobs on appropriate pegs.turn on the circuit breaker. Check that knobs are aligned properly and turn on - let it run so that it would shut off as you raise or lower the heat or cool. If it shuts off- yeah it is fixed!!! Replace the cover carefully after a thorough cleaning. You are DONE! Read more...