General Electric Microwave Caps and Lids
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular General Electric Microwave Caps and Lids
Your Price
$11.40
In Stock
General Electric Microwave MICA COVER
PartSelect Number PS2369910
Manufacturer Part Number WB06X10828
Your Price
$20.43
In Stock
General Electric Microwave COVER WAVE GUID
PartSelect Number PS3486812
Manufacturer Part Number WB39X10034
Fixes these symptoms
- Noisy
- See more...
Installation Instructions
Jason from KIRKLAND, WA
Your Price
$21.44
In Stock
General Electric Microwave Stirrer Fan Cover
PartSelect Number PS1480811
Manufacturer Part Number WB06X10712
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches in diameter. Occasionally, the stirrer fan cover can melt, and become damaged. If you smell burning from your microwave or notice damage, the fan cover should be replaced. The stirrer fan cover is sold individually, and is an OEM part directly from the manufacturer.
Installation Instructions
Steven from UTICA, NY
cover stirrer fan was burned and sparking in three part even the plastic rivet
just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then replace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : )
Read more...
Your Price
$21.37
In Stock
General Electric Microwave CANOPY MICA
PartSelect Number PS1017735
Manufacturer Part Number WB06X10638
Installation Instructions
Bill from MAGNOLIA, TX
The part was burnt and was causing sparking inside the microwave
Removed the old canopy mica, it has tabs that slip into slots on the top of the microwave. Then installed the new part, the tabs are inserted into the same slots.
Read more...
Your Price
$10.21
In Stock
General Electric Microwave Wave Guide Cover
PartSelect Number PS1020520
Manufacturer Part Number WB48X10047
This is the replacement wave guide cover for your microwave. It is white in color and is approximately 3 ½ inches long and 4 inches wide. It has two small tabs at the top that allow it to lock into place. The wave guide cover transmits microwave radiation while preventing steam and food particles from interacting with the sensitive electronic components of the microwave. If your wave guide cover is damaged or missing, it will need to be replaced. Be sure to disconnect power from the microwave before you begin this repair. This part is sold individually and is an OEM part.
Installation Instructions
Jim from FORT COLLINS, CO
Wave guide cover one of the pins holding it in place was missing / cover loose
I simply removed the other push pin holding in the old cover and put the bottom in first and snaped into place at the top. The whol job took less than 5 minutes.
Read more...
Your Price
$14.76
In Stock
General Electric Microwave WAVE GUIDE
Then Unplug Unit put on firm surface and go to rear & side of unit & take off only screws on the perimeter of the case. Then take off screws on side of case. (only 1 side has screws) Then make sure you discharge your static electricity by touching some metal or using a grounding wire device (most of us Computer Tech's have). Then gently slide case off from under front tabs. Looking at the right side of the Microwave (front facing) you will see a plug sitting up with two screws. You will not see the bulb as it is inserted upside down in a cover which shields it. The bulb will have a 2 wire attachment shielded by a electric cable attachment. If you don't see it immediately, refer to the schematic under your case or refer to the diagram on this web site carefully. The bulb is there in plain view. After removing the two screws and re- attaching the power cable to the bulb. Re slide on the case cover and replace the screws. I kept my security Torx screws in place in case I ever need to go to a repair person for more serious service then replacing a bulb. Read more...
PartSelect Number PS227965
Manufacturer Part Number WB06X10254
Installation Instructions
lenwood from Ruther Glen, VA
Replace Lamp Bulb in GE Profile Microwave
First went to Sears & got 'Security Torx' screw driver set for 8.99. Got set of 6 drivers that will fit on drill , this is what will open bottom 2 screws on rear of Microwave. The other screws on the microwave are Phillips head screws. Then Unplug Unit put on firm surface and go to rear & side of unit & take off only screws on the perimeter of the case. Then take off screws on side of case. (only 1 side has screws) Then make sure you discharge your static electricity by touching some metal or using a grounding wire device (most of us Computer Tech's have). Then gently slide case off from under front tabs. Looking at the right side of the Microwave (front facing) you will see a plug sitting up with two screws. You will not see the bulb as it is inserted upside down in a cover which shields it. The bulb will have a 2 wire attachment shielded by a electric cable attachment. If you don't see it immediately, refer to the schematic under your case or refer to the diagram on this web site carefully. The bulb is there in plain view. After removing the two screws and re- attaching the power cable to the bulb. Re slide on the case cover and replace the screws. I kept my security Torx screws in place in case I ever need to go to a repair person for more serious service then replacing a bulb. Read more...
Your Price
$39.00
In Stock
General Electric Microwave WAVE GUIDE COVER WITH NU
PartSelect Number PS9493024
Manufacturer Part Number WB34X21610
Your Price
$25.01
On Order
General Electric Microwave WAVE GUIDE MICA COVER
PartSelect Number PS227928
Manufacturer Part Number WB06X10215
Your Price
$13.28
In Stock
General Electric Microwave Wave Guide Resin Cover
PartSelect Number PS2321139
Manufacturer Part Number WB06X10764
Your Price
$24.50
In Stock
General Electric Microwave Light Cover Frame
PartSelect Number PS651487
Manufacturer Part Number WB36X10216
Glass not included.
Installation Instructions
jerene from Houston, TX
Glass was broken
I took the cover off, and replaced the glass-- the difficult part, was ordering the glass..on the list of parts to order-- the description of the glass was mis-leading
Read more...
Related General Electric Microwave Parts
- All General Electric Microwave parts
- General Electric Microwave Brackets and Flanges
- General Electric Microwave Circuit Boards and Touch Pads
- General Electric Microwave Doors
- General Electric Microwave Ducts and Vents
- General Electric Microwave Electronics
- General Electric Microwave Fans and Blowers
- General Electric Microwave Filters
- General Electric Microwave Fuses
- General Electric Microwave Glass Tray and Supports
- General Electric Microwave Grates
- General Electric Microwave Grilles and Kickplates
- General Electric Microwave Handles
- General Electric Microwave Hardware
- General Electric Microwave Knobs
- General Electric Microwave Latches
- General Electric Microwave Legs and Feet
- General Electric Microwave Lights and Bulbs
- General Electric Microwave Motors
- General Electric Microwave Panels
- General Electric Microwave Power Cords
- General Electric Microwave Racks
- General Electric Microwave Springs and Shock Absorbers
- General Electric Microwave Switches
- General Electric Microwave Thermostats
- General Electric Microwave Transformers
- General Electric Microwave Trays and Shelves
- General Electric Microwave Wheels and Rollers
