General Electric Refrigerator Wheels and Rollers

General Electric Appliance Parts

Popular General Electric Refrigerator Wheels and Rollers

Your Price
$9.49
  In Stock
General Electric Refrigerator WHEEL PAN COVER
★★★★★
★★★★★
1 Review
PartSelect Number PS283653
Manufacturer Part Number WR01X10209
Installation Instructions
Thomas from Kissimmee, FL
Broken shelf and drawer
Removed old and replaced with new Read more...
Your Price
$9.52
  In Stock
General Electric Refrigerator Single Roller
★★★★★
★★★★★
1 Review
PartSelect Number PS11738235
Manufacturer Part Number WP10450603
This wheel is sold individually. It is located on the bottom of the refrigerator.
Installation Instructions
mike from holly springs, NC
Left front plastic wheel was broken
Pop loose the plastic grate at the bottom.

Locate and remove the wheel leveling screw from the front bottom corner.

Remove cotter pin from the pin that mounts the wheel assembly to the refrigerator. Tap out the mounting pin.

Lift out the wheel assembly.

Remove the Roller pin from the wheel assembly. I used a Dremel tool with a cutting disk. A hack saw will also probably work.

Install the new roller pin and wheel into the wheel assembly. Use a hammer or vice to peen over the end of the roller pin.

Reinstall and adjust wheel assembly.
Read more...
Your Price
$8.06
  In Stock
General Electric Refrigerator ROLLER Assembly
PartSelect Number PS8757904
Manufacturer Part Number WR02X13658
Installation Instructions
Arthur from NORTH PORT, FL
The roller bearings on the Salad/ vegetable storage bins broke and the bins would not slide easily.
Replaced both Crisper Drawers with new units which had the roller bearings attached. Very poor factory design of the roller bearings attachment which have not been improved in the replacement drawers. I expect this problem to repeat a few years down the road. Read more...
Your Price
$58.58
  In Stock
General Electric Refrigerator MOBILITY FRONT Assembly
PartSelect Number PS1766092
Manufacturer Part Number WR02X12454
Installation Instructions
Chris from LOS ANGELES, CA
The front wheel pivot pin walked out causing the front wheel assembly (mobility front assembly) to collapse into the refrigerator base
A second person is necessary to help prop up the refrigerator. One person will need to insert a 6 inch support under the front of the refrigerator base while another person rocks the refrigerator back to provide access for the support to be inserted.

The front refrigerator panel was removed to reveal the refrigerator base and provide access to the front wheel assembly adjustment screw (screw mobility). The front of the refrigerator was propped up on a solid support about 6 inches above the floor to provide access to the front wheel assembly and allow removal through the base of the refrigerator. The front wheel assembly was dislodged from the base by first removing the pivot pin by hand and then prying the wheel assembly loose with a screwdriver. Normally the pivot pin would need to be released by prying it loose with a screwdriver and then pulling to free by hand. Once the front wheel assembly was dislodged the adjustment screw was removed with a socket set and the front wheel assembly fell out of the refrigerator base. The new front wheel assembly was then inserted into the refrigerator base, the new pivot pin was inserted and aligned with the support holes and pressed into place to secure with locking mechanism. The new adjustment screw was then inserted into the refrigerator base hole, aligned with the front wheel assembly and hand tightened to set the first threads. The adjustment screw was then tightened with a socket set to seat the adjustment screw. The refrigerator was then lowered and the adjustment screw was adjusted to level the refrigerator. The refrigerator was then pushed back into its normal position and a final adjustment performed to assure the refrigerator was level. The front refrigerator panel was then pressed back into place.
Read more...
Your Price
$20.97
  Special Order
General Electric Refrigerator AXLE WHEEL
PartSelect Number PS1483080
Manufacturer Part Number WR01X10604
Installation Instructions
jonathan from Bessemer City, NC
Wheels worn out.
Can’t repair it yet. Because it’s taking you too long to send me my parts. Tried calling but your answering service conveniently won’t answer. Had to cancel first order and reorder hopefully to receive faster. Read more...
Your Price
$38.16
  Special Order
General Electric Refrigerator Rear Roller - Black
PartSelect Number PS472376
Manufacturer Part Number 5304418225
Sold individually.
Your Price
$24.63
  In Stock
General Electric Refrigerator Roller
PartSelect Number PS11743617
Manufacturer Part Number WP67005149
Sold individually.
Your Price
$94.26
  Special Order
General Electric Refrigerator Freezer Basket Wheel
PartSelect Number PS283505
Manufacturer Part Number WR01X10055
Sold individually.
Your Price
$9.76
  In Stock
General Electric Refrigerator AXLE- ROLL
PartSelect Number PS1845608
Manufacturer Part Number 67006434
Your Price
$41.45
  Special Order
General Electric Refrigerator MOBILITY FRONT Assembly
PartSelect Number PS1483182
Manufacturer Part Number WR02X12274
Installation Instructions
George from ARLINGTON, VA
Stripped Front Leveling Roller & Screw
Raised side of fridge enough to get 1/4" ratchet with 1/4" socket under roller wheel assy. Removed three hex-head screws to separate damaged wheel assy from fridge frame. From panel below fridge compartment, backed-out stripped leveling screw. Mounted new roller assy and then threaded in new leveling screw from front. Lowered fridge and adjusted leveling screw for proper height. Suggest putting a 2x4 under fridge for safety when hands are under unit. Read more...

Related General Electric Refrigerator Parts