Kenmore Microwave Springs and Shock Absorbers

Your Price

$8.19

Kenmore Microwave Spring

★★★★★

1 Review

PartSelect Number PS3524607

Manufacturer Part Number 4970WRA001G

Fixes these symptoms

Door not closing properly
See more...

Your Price

$48.34

Kenmore Microwave Door Latch Spring

PartSelect Number PS979582

Manufacturer Part Number 5304440316

The microwave door latch spring creates tension, and engages the door latch when the door is closed. This spring is made completely of metal, and is approximately 1 inch long. If your microwave door will not open or close properly, the microwave will not start. You may need to remove the control panel to gain better access to where the spring attaches, so make sure the power is disconnected from the microwave. This part is sold individually. NOTE: Remember to discharge the capacitor for your microwave before beginning this repair. The capacitor can hold a potentially lethal charge even when the power has been disconnected from the microwave itself.

Fixes these symptoms

Door not closing properly
See more...

Your Price

$16.16

Kenmore Microwave SPRING

PartSelect Number PS979639

Manufacturer Part Number 5304440831

Your Price

$11.25

Kenmore Microwave SPRING

PartSelect Number PS1993448

Manufacturer Part Number 5304464069

Fixes these symptoms

Door not closing properly
See more...

Installation Instructions

Patricia from CLEARWATER, FL

MW wouldn't stop running- not heating, just running

Went through some anxious hours when I found that the MW would not turn off. The only way was to leave the door open. Not a solution. Tried a appliance repair that I knew, they didn't work on MWs. Spoke to the manufacturer, for $99 would come out and then tell me the real cost to fix. After more searching, even to maybe getting a new MW, (which necessitates getting a new bracket for the over the stove MW. They evidently are not standard, but proprietary to brands. Not good!)Buying a MW, okay, but someone has to put it in. Where are the good old days of selling, delivery, service? I'm from a small town, that's SOP.
I found PartSelect and called them. They didn't have the exact problem I had. They had a FAQ about the MW not starting. Mine wouldn't stop.
After describing what was happening, they had it in one. Looked at the plastic latch, bottom was curved out of shape. Door wouldn't close properly, causing it to run. It didn't heat, just ran. I ordered the parts. A spring and a latch. They came in quickly and my son and I began the repair. Found a You Tube on a similar type of door and they posited it might be the latch with step by step to follow. Ran back and forth from computer to kitchen.
Now, we didn't have the right tools to go along with the video we were watching. A long thin blade (about 12 inches) knife was used as the putty knife to pry up the edging that held the door glass. My son's long thin tiny philips screwdriver he uses to fix toys worked for the really tiny screws that held the latch part. We didn't have long nose pliers, but we messed up that part anyway, forgot to put in the new spring with the new latch. We worked it by hand and it went back together. Put it all together and discovered we forgot to put those tiny screws back at the latch. Wrestled the door back on and started it. Almost had a heart attack as it still was running when off. So unplugged,let it reset and it's been fine. Think it probably would have gone smoother with the proper tools. Anyway, glad I found PartSelect and that it was a relatively easy fix, even for those without tools and experience. A am a retiree, so don't feel you can't do it. Thank you so much PartSelect. Read more...

Your Price

$8.19

Kenmore Microwave Spring

PartSelect Number PS3524603

Manufacturer Part Number 4970WRA001B

Fixes these symptoms

Door not closing properly
See more...

Your Price

$8.19

Kenmore Microwave Spring

PartSelect Number PS3524605

Manufacturer Part Number 4970WRA001E

Your Price

$7.37

Kenmore Microwave Spring

PartSelect Number PS3525457

Manufacturer Part Number 4B72023A

Installation Instructions

LESTER from FOREST HILLS, NY

not all control buttons worked, including button for the light under the microwave

1.Disconnected microwave from power 2.Put spring into middle round opening of the button compartment 3.Snapped in new button. So far 20 second job! 4. Removed front control panel from the microwave. Located Micro Switch,(on the left side connected with two snap-in wires).Pull out wires, pull out the switch. Replaced faulty switch with the new one. Snapped in two wires. Very easy. However, need short 2" philip screwdriver to be able to unscrew screw holding the old switch. Few minutes job! 5. Attached front panel. 6. Connected microwave back to power. Problems gone all work fine. Read more...