Kenmore Range Valves

Your Price

$78.74

Kenmore Range LP Conversion Kit

★★★★★

4 Reviews

PartSelect Number PS3633782

Manufacturer Part Number GRLP4

The LP conversion kit is used in ranges

Installation Instructions

James from KENSINGTON, OH

BAD LIGHT SOCKET

Repaired under warranty Read more...

Your Price

$39.12

Kenmore Range Burner Head - Large - 12K

★★★★★

14 Reviews

PartSelect Number PS1480992

Manufacturer Part Number WB16T10046

This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.

Fixes these symptoms

Element will not heat
Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Alejandro from Newark, NJ

The Burners and Burner Caps were missing

Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...

Videos!

Your Price

$39.85

Kenmore Range Burner Head - Medium - 9500

★★★★★

9 Reviews

PartSelect Number PS1020327

Manufacturer Part Number WB16K10055

This burner head, or surface burner, is used in ranges and ovens. The burner sends gas through the holes and slots to create an equal flame across the cooking area. If the gas igniter glows but will not light up, or there are heating inconsistencies, replacing the burner head could be the solution to your problem. No tools are required for this installation. To change the burner, first lift the grate and take the burner cap off. Next, lift the burner away from the cooktop. To set the new burner in place correctly, check the locating tab that fits into the V-shaped notch and make sure the igniter fits into the cut-out. Refer to the diagram provided by the manufacturer for further instructions.

Fixes these symptoms

Gas igniter glows, but will not light
Will Not Start
See more...

Installation Instructions

Alejandro from Newark, NJ

The Burners and Burner Caps were missing

Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...

Your Price

$41.30

Kenmore Range Small Burner - 5K

★★★★★

8 Reviews

PartSelect Number PS3486550

Manufacturer Part Number WB16K10070

Sold individually.

Fixes these symptoms

Gas igniter glows, but will not light
See more...

Installation Instructions

Alejandro from Newark, NJ

The Burners and Burner Caps were missing

Very simple repair. I bought the Range without the Burners and Burner Caps. So all I had to do was to purchase the Burners and the Burner Caps and drop them in. Wish everything in life would be that simple. Read more...

Your Price

$65.67

Kenmore Range Natural Gas to Liquid Propane Conversion Kit

★★★★★

7 Reviews

PartSelect Number PS2351422

Manufacturer Part Number GRLP3

This kit is used to convert your appliance to liquid propane. This liquid petroleum gas conversion kit contains seven orifices, each under an inch long.

Installation Instructions

Denny from Bishop, CA

Bought a new gas oven that did not come with a propane conversion kit.

I followed the simple instructions that were included in the kit. I started by replacing the 5 orifices on the top burners. The orifices are well labeled with numbers and colors. Next, I tightened the broiler burner orifice and the oven burner orifice with a 1/2 inch wrench. I had to tighten them pretty good to get the flame down where it is supposed to be. Then, I checked for leaks and I was then ready to cook. Read more...

Videos!

Your Price

$17.26

Kenmore Range Left Front Orifice - 9.5K

★★★★★

2 Reviews

PartSelect Number PS2332664

Manufacturer Part Number 316527500

Your Price

$27.10

Kenmore Range Medium Burner - 9.5K

★★★★★

2 Reviews

PartSelect Number PS439737

Manufacturer Part Number 316212400

The surface burner head is used for ranges and ovens, and is located on the cooktop, where the flames go up. The surface burner spreads the gas through holes to create an even flame throughout the entire cooking area. If your surface burner is damaged it can affect the distribution of gas, or the flames may not come up correctly. If this is the case, replace this part. The measurements of the surface burner are: 6.25 inches in length, 5.13 inches in width, 8 inches in height, and 0.4 pounds in weight. Allow your cooktop to cool before installing this part. Refer to the manual provided by the manufacturer for further repair instructions.