Microwave Fans and Blowers
- Search your model number to find:
- Genuine OEM parts guaranteed to fit
- Free manuals and guides
- Repair instructions and videos
Popular Microwave Fans and Blowers
Your Price
$19.39
In Stock
Microwave Convection Fan Blade
PartSelect Number PS3409337
Manufacturer Part Number 318398302
This convection fan blade is designed for use with various makes and models of range and oven and is sold as an individual part. Made of metal and measuring approximately 4.75-inches in diameter, this genuine OEM fan blade works with the convection motor to circulate and distribute heat evenly throughout the oven. If your oven is not getting hot enough or the heat is not circulating properly, or if the fan blade in your oven has become warped, damaged, or chipped, it needs to be replaced immediately. To replace the fan blade, disconnect your range from the power and locate the fan assembly. With the appropriate screwdriver and wrench, remove any assembly covers and the securing nut from the blade. Once the nut is removed, install the new blade and secure it and re-install the cover.
Installation Instructions
John from Stevensville, MD
replacing the fan on a convection oven (fan was making a vibration noise)
This was the first time replacing the fan. It is a lot easier to work in the oven compartment with the oven door removed, only two screws on the door and the hinges were released. I found that a couple of the screws were either rusted or stripped so I used a pair of pliers to remove the screws that were holding the diffuser in place. Once there was access to the fan I found that the fan was warped and that the blades were scraping against the back wall of the oven. The next challenge was to remove the retaining nut. I used a sheet metal screw to secure the warped fan to keep it from spinning. once I figured out that you have to turn the retaining nut to the right to loosen, it came off easily. 1/2" socket with extension. When I replace the fan I used two washers for spacers to make sure that the fan would not scrape the wall of the oven. Its been tested many times and the oven does not make that horrible sound anymore.
Read more...
Your Price
$12.51
In Stock
Your Price
$208.08
In Stock
Your Price
$8.17
In Stock
Your Price
$187.50
On Order
Your Price
$15.94
In Stock
Microwave Fan Assembly
PartSelect Number PS3528563
Manufacturer Part Number 5893W3A002D
Installation Instructions
Mike from PINEY FLATS, TN
The fan cover in top of the cooking area was burned.
The original cover was burned and actually caught on fire. Research informed me that food can splatter and stick to the cover. The particle will get hot enough to ignite the plastic cover. I ordered the cover and included the fan since it was so cheap, Replacement was super easy. Done in 10 minutes and made my wife happy. She was ready to buy a new microwave because she thought something was wrong with ours but food splatter was the cause. Parts were less than $10 + $6 shipping. Keep the inside of the microwave clean!!
Read more...
Your Price
$8.17
In Stock
Microwave Cooling Fan Blade
PartSelect Number PS3528615
Manufacturer Part Number 5900W1A007C
This cooling fan blade is for microwaves. Cooling fan blade attaches to the shaft of the cooling fan motor and rotates to blow air over the magnetron.
Your Price
$102.29
In Stock
Your Price
$185.53
In Stock
Your Price
$185.30
On Order
