Models > DBXR463EG1WW > Symptoms > Timer Not Working

Parts That Fix General Electric Dryer DBXR463EG1WW Timer Not Working

Timer Not Working is a commonly reported symptom for the DBXR463EG1WW General Electric Dryer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your DBXR463EG1WW General Electric Dryer that will fix Timer Not Working. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Dryer Timer
Fixes Symptom 55% of time
Dryer Timer – Part Number: WE4M533

This is a genuine OEM replacement timer (60Hz) for your dryer. To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top of the back panel. Disconnect the wires to the timer terminals, remove the timer knob, and unclip the timer from its metal tab. Replace with the new timer and reassemble the wires and remaining parts. Make sure to disconnect power to the dryer before beginning this repair.

$ 112.13
  In Stock
PartSelect Number PS8690648
Manufacturer Part Number WE4M533
2 Timer Knob
Fixes Symptom 45% of time
Timer Knob – Part Number: WE1M654

This timer knob is used to set the dryer cycle by advancing the timer. The plastic can become brittle with age and crack where it attaches to the timer shaft. You will need to replace this part if it slips off the shaft and cannot advance the timer. If it constantly falls off and will not stay on the shaft by itself, it may be cracked or broken and need to be replaced. This model is roughly 3 inches in diameter and made of white plastic. Sold individually.

$ 38.88
  In Stock
PartSelect Number PS1482197
Manufacturer Part Number WE1M654
Back to Top