Models
>
FD590V
FD590V (CS06) Kawasaki Engine - Overview
Sections of the FD590V
[Viewing 12 of 12]Keep searches simple, eg. "belt" or "pump".
Plug-Spark,Bpr4Es(Ngk),Solid
PartSelect #: PS9314547
Manufacturer #: BPR4ES
This NGK BPR4ES spark plug is sourced from the original manufacturer for use in a variety of small engines. It is responsible for igniting the fuel-air mixture in the engine cylinder, needed for the e...
$5.23
In Stock
Rod-Push
PartSelect #: PS8860046
Manufacturer #: 13116-2057
This OEM Push Rod is a silver, metal part, approximately 5.5 inches long. It can be installed using a wrench or sockets. A Spark Plug Gap Tool may also be needed for maintenance. The installation of t...
$5.22
In Stock
Questions And Answers for FD590V
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
- < Prev
- 1
- Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
September 7, 2022
Engine has no spark on either cyclinder
For model number FD590V
Hello Donald, thank you for reaching out. According to our research on the model, the problem appears to be with the Spark Plug, part number PS9314547. If that does not help then the issue is likely to be with the Ignition Coil, part number PS8919143. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair!
Was this helpful?
Thank you for voting!
Related Parts:
Arthur
April 4, 2023
My engine stops running on one cylinder from time to time. Had plugs, plugs wires and coils replaced by service shop. It ran fine for about 3 hours, then one of the cylinders dropped out. need to be able to follow step by step trouble shooting to determine issue,
For model number FD590V
Hi Arthur, thank you for reaching out. According to our research, we would advise checking the air gap for the spark plug and the ignition coil. Make sure, the engine is using authorized fuel and check the air-fuel mixture is injected through the fuel injector properly. Kindly, install the spark plug and ignition coil properly in the required position. We hope this information is useful!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >