Make sure you haven't got the discount earlier.
Parts That Fix Frigidaire Refrigerator FRS6LR5EM2 Door won’t open or close
Door won’t open or close is a commonly reported symptom for the FRS6LR5EM2 Frigidaire Refrigerator, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your FRS6LR5EM2 Frigidaire Refrigerator that will fix Door won’t open or close. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Sold individually.
Replacing your Frigidaire Refrigerator Hinge Bearing
Customer Repair Stories
Broken Hinge Bearing
-
Edward from Newnan, GA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
loud crack when fridge door opened past 90 degrees
-
Barry from Spring valley, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Wrench (Adjustable)
Sold individually. This cam is located at the bottom of the fridge/freezer door.
Replacing your Frigidaire Refrigerator Door Closing Cam
Customer Repair Stories
plastic door holder broken
-
Bill from Lady LAke, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers, Socket set
plastic closer plate broken
Second removed plastic cover plate and metal plate assembly from top of door.
Third lifted door of metal pin on bottom.
Fourth removed broken closer plate and replaced
with new closer plate.
Set door back in place.
Re secured the met ... Read more al plate and plastic cover plate.
Replaced the door shelves and food. DONE.
-
Sandra from Alto, NM
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
As you look into the fridge, this drawer support track is located on the right-hand side. This item is white in color and made of plastic. The drawer support track can wear out over time. The only tool required is a Phillips screwdriver. Empty out the drawer and remove it by sliding it forward. Lift out the shelf, remove the screw on the side of the shelf, remove the rail by pushing the rail forward and snapping out of place, insert new rail, and install the screw back in. Now the shelf can be put back into the refrigerator. The mounting screws are sold separately.
Replacing your Frigidaire Refrigerator Meat Drawer Rail - Right Side
Customer Repair Stories
My son pulled on the meat pan & cracked the right support.
-
Tina from Baroda, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Support rail broke
-
Karl from Bellaire, TX
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
This crisper cover front support is used to keep the crisper shelf in place and may need replacing if the door will not open or close. This white, OEM part measures roughly 1 inch in diameter and can be used for the front and the rear support, as designed by the manufacturer, and mounts to the inside cabinet wall. Replacing this part is an easy repair, and will require a small flat blade screwdriver, a putty knife, and a soft hammer. Remove the crisper and shelf from the refrigerator before replacing the support. The crisper cover front support is held in place with a locking pin. To remove the old part, you will first need to push the pin into the interior of the cabinet using the screwdriver, and then you can pull the support out with a putty knife. If you cannot get the pin out you can use a flat-blade screwdriver to push it down and out of sight and it will not harm anything in your refrigerator After removing the pin and attaching the new support, simply use the soft hammer to lock the new pin in place.
Replacing your Frigidaire Refrigerator Crisper Cover Support - Front
Customer Repair Stories
broken shelf support
screwdriver and pushed pin into wall. I lined up new support and pushed in peg to secure
-
Richard from West Seneca, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
Support stude for both vegetable crispers broken off
None of this was obvious - an online tip from another member was invaluable ... Read more .
-
RANDY from NORTH CHARLESTON, SC
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
This drawer rail supports the left hand side of the sliding drawer. The mounting screws are sold separately.
Replacing your Frigidaire Refrigerator Meat Drawer Rail - Left Side
Customer Repair Stories
Drawer hanger broken
-
Tracy from danville, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
It was broken in the front part that hooked in the hole
-
Harriet from LOCKWOOD, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
This is the replacement hinge kit for your refrigerator. This kit contains both the left and right hinges. Each hinge is made mainly of metal and plastic and is approximately 3 inches by 3 inches. This hinge kit does not contain the mounting hardware. The adjustable hinge kit supports the refrigerator and freezer doors and allows the doors to pivot open. The hinge kit also makes it easy to level the doors. This kit is a genuine OEM part sourced directly from the manufacturer.
Replacing your Frigidaire Refrigerator Hinge Kit - Left and Right Hinges
Customer Repair Stories
Bearing broke
removed doorstop with broken Bearing and replaced with new Parts. Took about 20 Minutes
including reattaching Door. A 10 year old can do it.
-
Walter from Hamilton, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
Right door makes loud poping sound when open and close
-
HUNG from CARSON, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set
This authentic rear crisper support is a white, plastic part which is rated as "easy" to install by our customers. This OEM part replaces the rear crisper cover support in your fridge and mounts to the inside cabinet wall. If there is visible damager or your crisper stops fitting properly, it may be time to replace the part. Check your user manual and model number to ensure this part is what you need. Replacing the rear crisper support in your refrigerator is an easy job. This part is made from plastic and mounts on the inside of the wall. To complete this repair you will need a small putty knife, a punch or a short flat blade screwdriver, and a small hammer. You may need to replace your rear crisper support if you find that the door will not open or close. In order to complete this repair, you will need to remove all the shelves above the crisper in order to have ample room to work. It is also good to have duct tape on hand, which can be used to protect the liner around the support. This part is sold individually. Please note that the rear and front crisper support are different parts; this is the one you are looking for if it is your rear support that needs replacing.
Replacing your Frigidaire Refrigerator Crisper Support - Rear
Customer Repair Stories
Crisper bin track support
-
Ruth from Lake Forest, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Crisper Supports broken
-
GEORGE from ASHEVILLE, NC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Wrench set
This part is the replacement hinge bearing for your refrigerator. It is made of black plastic and is approximately 1 inch in diameter, and 1 ¼ inch in length. The hinge bearing connects the door panel and the door hinge and helps the door open and close properly. If you notice a clicking sound when opening or closing your refrigerator, or if the door won’t close at all, you may need to replace the hinge bearing. This part is sold individually and is an OEM part sourced directly from the manufacturer.
Customer Repair Stories
The refrigerator door making popping sound
-
ernesto from PORT ISABEL, TX
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
Clicking of refrigerator door
-
Susan from PASADENA, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
This upper crisper drawer cover is a manufacturer-approved replacement part for your refrigerator. It has drawer glides molded into the frame but this part does not include the glass cover. To replace this part, lift out the glass cover and snap out the drawer frame. Snap this new frame cover into place and replace the glass.
Customer Repair Stories
Shelf broken
-
Matthew from Shawnee, KS
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
The Upper Crisper Drawer Cover cracked in the Front
-
LAUREN from MADERA, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Can be used on either Fresh Food or Freezer side of the refrigerator.
Replacing your Frigidaire Refrigerator Upper Hinge Bearing
This is the replacement door stop for your refrigerator. It is black in color, made of metal, and measures approximately 2 inches by 2 inches. The door stop attaches to the bottom of the door and prevents it from swinging open and hitting the side of the cabinet. If your refrigerator door swings all the way open, it is a good indication that the door stop will need to be replaced. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
This clear plastic crisper drawer is for side-by-side refrigerators. It is sold individually and sourced right from the original manufacturer. Please note that the new pan does not have the humidity control slide, and this component is now sold separately. The crisper drawer is designed to store produce at a humidity level that ensures your food is kept fresh for as long as possible. It is commonly replaced because it is cracked, warped, or stained. For this simple tool-free repair, start by opening your refrigerator door and sliding out the old crisper drawer. Take your new crisper drawer and align the thin ridge on the top of the drawer with the track located inside the refrigerator. Slide the new part into place and your repair is complete.
Customer Repair Stories
Old crisper drawer cracked
-
Joel W from LAUGHLIN, NV
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
closed the door and broke the draw
Gene
-
Gene LaFond from NAPAVINE, WA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
This part contains molded glide rails for the crisper pan. It does not come with the glass shelving. The glass is not included. Must be ordered separately.
Customer Repair Stories
broken cover
-
harry from long beach, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
No problem
-
Donald from SAN CLEMENTE, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
This door bin (Bottom Door Bin, Refrigerator Door Bin, Door Shelf Bin, Refrigerator Door Bin) is a movable bin mounted on the inner door to hold food items, bottles, and jars. Over time, a cold refrigerator can cause plastic to become fragile and break down. This can lead to other issues in the refrigerator. When the door bin will not hold securely onto the inner door panel, it must be replaced. This door bin measures 5.75 inches high, 16 inches wide, by 4.25 inches deep and is made of white plastic. Sold individually.
Customer Repair Stories
broken door shelf bin
-
Elsie from Effingham, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
I broke the bottom door shelf by "forcing" in too many jars
-
Marc from Oberlin, OH
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.
Customer Repair Stories
worn out gasket...
-
Yves from Miramar, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
refrigerator gasket is worn off
-
alvin from staten island, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
Sold individually.
Sold individually.
An ice chute is mounted to the interior panel and extends between the interior panel opening and the dispenser opening for transferring ice through the chute door.
Replacing your Frigidaire Refrigerator Ice Chute Door
Customer Repair Stories
Part 30 on the Ice and water dispenser drawing was broken and needed to be replaced in order to seal the ice chute opening into the freezer.
-
Jon from SEBRING, FL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
The ice chute door didn't close all the timed
-
Shelby from Clinton, IL
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
Sold individually.
Replacing your Frigidaire Refrigerator Upper Hinge Bracket
This door gasket is used to seal the freezer door when closed.
Customer Repair Stories
I noticed ice on the inside of freezer door
-
Russell from Lehigh Acres, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
Freezer door gasket became loose
-
Jerome from Detroit, MI
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins