Parts That Fix General Electric Dishwasher GDT720SSF0SS Not cleaning dishes properly

Sold Individually.

The element heating assembly is found at the bottom of the dishwasher tub, and helps to warm the water in the wash cycle, and dry the dishes afterward. If the water does not heat up during the wash cycle, or the dishes are not being dried properly, you may need to replace the element heating assembly in your dishwasher. This element heating assembly is horseshoe-shaped and is sold individually. To replace your heating assembly, first make sure it has cooled down, then simply slide the connecting tabs out. Replace with a new heating element and your problem should be solved.

This is a flood switch assembly for your washer. The flood switch controls the hot and cold water filling your washer tub to ensure the proper amount of water. You may need to replace this part if your washer is overfilling or underfilling with water. It is about 5.5 inches in length, and mostly black in color with a green tip.

This ultra-fine filter kit is compatible with various models of dishwasher and is a genuine part straight from the manufacturer. It is responsible for catching small food particles, debris, and other items that are washed off dishes during the cleaning process. The filter stops these particles from clogging the drain hose and other internal components thereby preventing damage to the dishwasher, maintaining a clear flow of water, and reducing unpleasant odors. The filter also prevents the debris from recirculating onto the clean dishes. You can find the dishwasher filter at the bottom of the dishwasher tub. It is recommended to clean the filter thoroughly every 3 to 6 months.

This part is the upper spray arm for your dishwasher. The spray arm is made of plastic and is approximately 10 inches wide. The upper spray arm is mounted to the top of the dishwasher tub, and rotates during the cycle to ensure that your dishes are washed evenly. If your spray arm is clogged or damaged, your dishes may not clean evenly, and you will need to replace the spray arm. To access the spray arm, you will need to remove the top dish rack, then simply unscrew the old arm. Screw the replacement arm in, replace the dish rack and your repair is complete.

The detergent dispenser in your dishwasher stores the detergent until it is ready to be dispensed. If your dishes are not coming clean, or you notice the detergent is still in the dispenser at the end of the cycle, you may have a damaged or malfunctioning detergent dispenser. This detergent dispenser is not sold with a sensor. It is gray in color and is sold individually. This is an OEM part sourced directly from the manufacturer.