This lid lock, also known as a door lock, is a genuine OEM replacement part for your washing machine. The lid lock keeps your washer lid closed during the washing cycle. If this part is broken, your w...
This drain pump assembly is for washers. Drain pump assembly removes water from the washer during the drain portion of the cycle. The assembly may include multiple parts; refer to your parts diagram f...
This lid lock striker is sourced directly from the manufacturer for use in top-load washing machines. It is a white, plastic component located on the underside of the washing machine lid. When the lid...
This is a drive belt for various models of dryer. This belt is responsible for allowing the drive motor to rotate the dryer drum. Over time and with use, this belt will wear out and if it becomes dama...
This is an agitator assembly for washing machines. Agitators are used within top load washing machines to move back and forth and effectively wash your clothes. However, if the agitator currently in y...
This is a water inlet valve; an electrically controlled solenoid valve that opens and closes when necessary, to control the flow of water into your washing machine during the washing cycle. This part ...
This lid lock bezel, also known as a trim piece, is a genuine OEM part designed for washing machines. It is approximately 3.5 inches long. The bezel is a white, plastic frame that fits around the peri...
This is a clutch for your washing machine. The clutch is made of a white plastic material and is used within washing machines to engage and disengage the transmission during the wash and spin cycles, ...
This is a mode shifter or shift actuator for models of washing machine. Mode shifters are designed to change the function of the washing machine motor, between spinning cycles and agitation, and is us...
This is a speed sensor for a variety of washing machine models. Speed sensors are used to monitor the speed of the washer drum and communicate it to the electronic control board to slow or quicken it....
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Beverly
February 27, 2020
I live in apt it comes with a GE washer it also has the deep rince button and the agitator top comes off easiely so is it possible it comes with the feature liq fabric soft dispenserif so its missing the pieces that go in the agiator part looks like 2 pieces pleased let me know id like to take part in the feature
For model number GTW220ACK4WW
Good Day Beverly. Thank you for your question in regards to your unit (Model Number GTW220ACK4WW). Based on our research, there is a Short Agitator Cap (PartSelect Number PS12073992) and a Screw (PartSelect Number PS11759130) that go inside the top of the Agitator on your unit. You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
the 2" circle around the agiator, not part of the stainless steel tub has a sharp object protruding through the rubber coating and is snagging clothes. Can this part be replaced?
For model number GTW220ACK4WW
Hi Danna, thank you for contacting us. According to our research, we recommend you replace your agitator, part number PS16542670, as it is damaged. We hope this sorts out your problem!
I originally sent in a question about the 2” wide plastic ring around the base of the agitator. It is not part of the agitator but a separate piece. Your answer said replace agitator which is not the problem. Can you look at a picture of the inside of this model, serial #ZH1014226?
Thank you.
For model number GTW220ACK4WW
Hi Danna,
Thank you for your question. If you are referring to the black ring that is around the shaft that the comes out from the bottom of the tub, it is part of the platform/transmission. The part number listed under your model number for the platform/transmission is PS16729509. If you would like to place an order for it, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Drain all the water out of the tub with a shop vac Remove rear drain hose and drained rest of water into a bucket Remove small rear panel (bottom left hand corner) where the drain hose connects Tipped washer up about 45 degrees to get underneath it - Supported it with a few paint cans Remove internal drain hose/clamps
... Read morefrom pump - w/ pliers Remove belt cover (gray plastic) with socket - 3 bolts Remove wire assembly plug from socket Remove old drain pump with socket - 3 bolts Install new drain pump - 3 bolts - plug wire assembly into socket Reinstall belt cover - 3 bolts Reinstall hose to drain pump (note panel will be inside washer) Feed drain hose panel through hole and reinstall - 1 nut Re attached drain hose to exterior drain plug You are done !
Very simple to repair. Be sure to drain the tub outside or into the sump pump then lay the washer on its side. The pump is right there on the bottom of the basket with 3 bolts. You will also need to remove the belt cover to get to the plug. So simple and saves you hundreds off repair man prices.
