This is a duct felt seal for a dryer. The duct felt seal allows the front-load dryer drum to glide smoothly on the front panel. Your dryer will not function properly if the drum felt seal is compromis...
This Drive Belt is 89.5" long and comes in black, featuring four ribs on the inside for a better grip. This is a long belt that wraps all the way around the dryer drum, around a tension pulley, and th...
This drum glide bearing is an authentic OEM replacement part that is compatible with dryers. It is white in color and made of highly durable plastic. The bearing allows the drum to rotate smoothly and...
This OEM replacement dryer slide bearing is white in color, and approximately 3 inches long. The slide bearings are supportive linings for your dryer. If they have eroded, or are damaged, the drums wi...
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on ...
The interlock switch may also be referred to as a belt switch. This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open. This is a part for your dryer. ...
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the...
This is a door handle made for use with dryers. This door handle is made of solid white plastic and allows you to open and close the door of the dryer. If your current dryer door handle is broken or m...
Note: The drum slides should also be replaced when your replacing the drum bearing. Slides are NOT included. This part helps your dryer operate as quietly as possible.
$49.79
In Stock
Questions And Answers for GUD27ESSJ0WW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Pete
March 11, 2020
Dryer will not run unless start switch is held down. Possible issues? Thanks.
For model number GUD27ESSJ0WW
Hello Pete, thank you for writing. It seems like the Switch itself is faulty and may need to be replaced. Push-to-Start Switch _Part#PS3487190.
Will not spin and drain. Already replaced door lock switch. Can't locate a timer as explained on some videos. Assume it's a newer model. What else can be the cause?
For model number GUD27ESSJ0WW
Hello Jim and thank you for writing.
The timer is located at the bottom right of your unit.
If the washer won't drain or spin, either something is stuck in the washing machine drain hose or pump, or the pump PS3501453 is broken.
Water is dripping from center of tub on to belt assembly as the tub starts to fill
For model number GUD27ESSJ0WW
Hello and thank you for writing.
It certainly sounds like it could be a faulty or damaged overflow hose PS3501410 and/or possibly a faulty tub gasket PS11763078 you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
I got a thermistor error code.Can a faulty thermistor cause the motor to not run at all?
i have replaced the lid lock switch. pressure sensor. control board. motor.
For model number GUD27ESSJ0WW
Hi Art,
Thank you for your question. Some newer models of electronic control dryers may use a thermistor in place of a cycling thermostat, to regulate the temperature in the dryer drum. The thermistor senses the airflow temperature as it exits the drum. The thermistor is a solid-state device and will vary in resistance according to the temperature. This resistance is monitored by the electronic control board which operates a relay controlling the heater or burner. If the thermistor becomes insulated with lint or foreign matter or is damaged or otherwise defective, it will not register the proper resistance and the control board may not turn the heater or burner off at the proper temperature. Some models may display a fault code when this happens. If your dryer is displaying a fault code, you can refer to our list of common appliance fault codes to determine the source. You can test the thermistor with a multi-meter if you know what the resistance should be at room temperature. This information may be located on the schematic diagram for the dryer. To test the thermistor, unplug your dryer and open the dryer’s cabinet. Locate and gently remove the thermistor to test it, it is normally located on the blower housing. Allow the thermistor to rest outside of the dryer prior to testing as it needs to be at room temperature to produce a reliable reading. Set your multi-meter to the Rx1 setting and place the prongs on each of the thermistor’s terminals. If the reading does not match what the resistance should be at room temperature, which varies by model, you need a replacement thermistor. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Robert
November 28, 2019
Is there a moisture sensor and where is is located
For model number GUD27ESSJ0WW
Hi Robert, there is a water level switch PS7320331, I could not find a moisture sensor however.
Thank you for your question and good luck with your repair!
Removed the front Dryer panel. Left drum in place and lifted it up slightly to get access to motor drive. Slipped belt in place and put panel back on. This was a first attempt ever at fixing an appliance and it was no big deal.
It was actually my father, he doesn't use the internet. He thought that because the dyer got real hot and then shut off he thought the thermostat wasn't working and the high temp shutoff was okay. He went through the manual and found the part and took it out. He called the service number but they wanted $50 dollars plus shipping. I saw it
... Read more was a Thermo-disc part so I tried the manufacture's website but I couldn't match the numbers on the back to their part numbers. I tried several other sites and your site was the cheapest. It was real easy to use the web site and diagrams to find the right schematic and part. I ordered it online and it was delivered in 2 days with the regular shipping. When he first put it in the dyer didn't turn on. He found no power coming out of the timer so he cleaned the contacts and it worked. Thanks for making the ordering so easy.
The end repair was very simple and took minimal effort. The time and difficulty was all in the testing. I disassembled the dryer and removed the drum and then hard wired each thermo-fuse to determine where the fault was. After test all of those I was stumped. When I opened the door the light would not come on so I assumed it was a pow
... Read moreer fault closer to the source. However after all of my testing I couldn't find anything wrong. I then removed the light bulb and realized it was burned out which led me to the door switch being the fault. I removed the switch and soldered the three wire together and the dryer started right up! All I had to do was order a new $15 part, unsolder the wires and plug them in. Would have been so much simpler if that light bulb hadn't of been burned out causing me to over think my diagnosis. This was my first major appliance repair and I did it with only the help of the parts diagram provided on the website.