Make sure you haven't got the discount earlier.
Parts That Fix Hotpoint Dryer HTDP120ED0WW Timer Not Working
Timer Not Working is a commonly reported symptom for the HTDP120ED0WW Hotpoint Dryer, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your HTDP120ED0WW Hotpoint Dryer that will fix Timer Not Working. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
This OEM Timer Knob is a white plastic knob which can be easily installed onto your machine's timer rod, in order to control the timer. If the part breaks off, it should be replaced. Refer to your user manual and model number to see if this part is right for you. It is a three-inch-diameter part that accepts a D-shaped shaft. To replace your faulty knob, simply pull the existing knob straight off the shaft and install the replacement back onto the shaft. No tools are required. This item is sold individually and is not part of a set. The timer knob contains the insert as well as the knob itself.
This is a genuine OEM replacement timer (60Hz) for your dryer. To complete this repair you will need a #2 Phillips screwdriver. To access the timer, you will need to remove the top of the back panel. Disconnect the wires to the timer terminals, remove the timer knob, and unclip the timer from its metal tab. Replace with the new timer and reassemble the wires and remaining parts. Make sure to disconnect power to the dryer before beginning this repair.