Models > JS750SF3SS > Symptoms > Little to no heat when baking

Parts That Fix General Electric Range JS750SF3SS Little to no heat when baking

Little to no heat when baking is a commonly reported symptom for the JS750SF3SS General Electric Range, and we have put together a full guide on how to fix this. This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your JS750SF3SS General Electric Range that will fix Little to no heat when baking. We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!

1 Oven Sensor
Fixes Symptom 99% of time
Oven Sensor – Part Number: WB23T10015
★★★★★
★★★★★
18 Reviews

Rated by 15 customers 

  

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.   

The function of the oven sensor is to detect the temperature within the oven cavity. If you notice that the oven is too hot or too cold, or it is not heating evenly, you may need to replace the oven sensor. The oven sensor is typically located in the back of the oven so you will most likely need to pull your oven out to access it. Many of our customers have rated this repair as easy. You will need a Phillips screwdriver to complete this repair. Be sure to disconnect the power source and shut off the gas valve before doing this repair.

$ 36.75
  In Stock
PartSelect Number PS236398
Manufacturer Part Number WB23T10015

Customer Repair Stories

Actual temperature did not match set temp

Removed the oven door for easy acces to oven. Unscrewed (philips screwdriver) the screw holding temp sensor in place. Gently pulled the wiring until quick connector was located. Pushed down on locking level on quick connect while holding other end of wiring (so wiring would not fall back behind oven). Connected the new sensor and screwed back in place. Reinstalled oven door. Tested temperature settings by turning on oven and comparing with a separate oven thermometer.
Read less
  • Brian from Fairfield, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!

Oven was not coming up to temperature

I had to remove the oven from the wall because the sensor plug connction is behind the unit. Two screws hold the sensor inside the oven and then I disconnected the lead and pulled the sensor out from the front. I installed the new sensor, tightened the two screws holding it in and connected the lead. Then reinstalled the oven into the wall. Overall, a very easy repair once you get the oven out.
Read less
  • Sean from Highlands Ranch, CO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
55 of 69 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top