The range thermostat is also commonly known as a stove, oven, cooktop, or range thermal fuse. This thermostat protects your oven from excessive heating, and will shut the oven heat off if excessive he...
This temperature sensor, also known as a thermistor, is compatible with various makes and types of appliances. This thermistor uses electrical currents to detect the interior temperature of the applia...
This is a genuine OEM leveling leg for various models of LG ranges. This leg is used to stabilize and support the range, and if damaged, broken, or missing, will cause your range to rock back and fort...
The sub PCB assembly (also referred to as a relay board), is a part for your range. If your oven is overheating, this might indicate that your sub PCB assembly needs to be replaced. You will need a Ph...
This radiant heater may also be known as a radiant surface element and is a part for your range. The function of this heater is to supply heat to the cooking area that is on the top of the range. This...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Steve
March 15, 2023
My oven when set at 350 degrees only climbs to 310, I've replaced the bottom element , temperature sensor, thermostat. Still not working, the oven relay board has 4 big relays and I guess a small one. You show for parts new board with 2 big relays . ???
For model number LRE30453ST
Hello Steve, thank you for getting in touch. According to our research, a 2-relay control board is compatible with your model, and you need to replace the electronic control board, part number PS6012667, to fix the issue. We hope this helps, good luck with this repair!
I need a heating Element for my LG stove not sure which one to order please help
For model number LRE30453ST
Hello Deborah, thank you for contacting us. The heating elements that will fit your stove are more than one. The element, part number PS3527760, is 9 inches. The element, part number PS3527758, is 10 inches and the element, part number PS3527756, is 6 inches. Please order the right one based on the dimensions. If you need an element for the oven, the bake element, part number PS3535354, and the broil element, part number PS3648888, will fit your model. Please reach out to customer service if you need help placing an order. Glad to be of help!
Hi Steve, thank you for your inquiry. According to our research, there might be an issue with the following parts: the temperature sensor, part number PS11732697, the thermostat, part number PS3530468, and the bake element, part number PS3535354. We hope this helps, good luck with this repair!
Go onto youtube, such as https://www.youtube.com/watch?v=-ITkrwhDNMQ and watch similar videos for DYI. The process is very similar to other models.
Once the door is removed, place oven door on a towel or soft place so it does not scratch the door. Unscrew the screws and make sure you notice where each screw goes, so you know
... Read morethe process of where each screw goes when you re-assemble.
Once the inner cover is removed, remove the insulation, too so you don't damage it. Use Wet/Dry Shop Vac to clean the shattered glass. (WORD OF ADVICE: I did not remove the insulation and the suction of the Shop Vac removed part of the insulation, so now instead of a quick turn around repair turns into a few weeks repair, because the insulation is on back order 10-14 days from the supplier. DON"T MAKE THE SAME MISTAKE!)
Once the glass has been removed, the new inner glass is replaced, begin by re-assemble the oven door with the correct screws and attached the oven door to the range.
I searched online and found someone that seemed to have the exact problem. That person had replaced the lower burner and the same PCB board I replaced. I was able to test the lower burner without removing it and it tested OK. The PCB board in the article I had checked was burned and obviously bad but mine was not. I took a chance and
... Read moreordered just the PCB board. I replaced this board and the oven now works perfectly. I seems this board was not turning on the bottom burner but the system thought it was working fine.
Removed the back of the Range. Removed one wire at a time from the old PCB and placed it in position on the New PCB. Then secured the New PCB in the holder.
