Parts That Fix Maytag Refrigerator MFI2269VEM10 Ice maker not making ice
Ice maker not making ice is a commonly reported symptom for the MFI2269VEM10 Maytag Refrigerator, and we have put together a full guide on how to fix this.
This advice is based on feedback from people who own this exact appliance. We have listed the most common parts for your MFI2269VEM10 Maytag Refrigerator that will fix Ice maker not making ice.
We have included repair instructions, and helpful step-by-step video tutorials. If you are experiencing this issue, not to worry, DIYers just like you have fixed this, and shared their experience to help you!
Ratings submitted by customers like you who bought this part.
This is an ice maker assembly for refrigerators. This assembly is responsible for freezing and breaking water that comes from the water line within your refrigerator. If your ice maker is not producing ice cubes anymore, and this assembly is turned on, you should test it with a multimeter before replacing it. This ice maker assembly features a primarily plastic construction, with a metal shut-off arm and two wire harnesses that supply it power. This ice maker assembly is an OEM part, and must be installed with the new wire harness in order for it to work.
$120.10
In Stock
PartSelect Number PS11769140
Manufacturer Part Number W10882923
Customer Repair Stories
Ice Maker quit making ice
I followed the instructions on the You Tube video (https://www.youtube.com/watch?v=6XdMrQeNYNw) and it works! It took about 2 hours because I had to stop and rewind the video. If you remember where things go when you disconnect, it's a snap. It was medium difficulty with very few tools just be careful when you remove the wiring harness. A
... Read morefter plugging it in, I heard the first ice drop in the bucket in about an hour; I was so excited I took a picture. This part saved me a service call and over $200!
Read less
Bradley from Derby, KS
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
9 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Stopped making ice, confirmed ice in trough, not ejecting ice or cycling
Please note I had to remove the complete old wire harness from and install the new proper one as my part number was replaced with a new part number. The new ice maker repair kit comes with 2 new harnesses each slightly different one for a 22 cubic foot model the other for the 25cf model. It looks intimidating initially, just take pictures
... Read more FIRST BEFORE removing old harness to see all the connections. I was surprised this was necessary but it is, as the 'H" pin on the front of the new ice maker motor was different from my old one. Would have only taken me 15 minutes or so to replace the old ice maker but with having to remove the old harness and re-route the new harness it will take you a bit of time and patience but you can do it. Another note you will have to remove the Electromagnet to get to the green grounding screw on the ice maker itself. There are good videos on Part Select and youtube showing how to remove the ice maker itself, but did not find one on the wire harness, like I said just take lots of good pictures showing all the connection points on the old harness and take your time. It was not too hard. And now I have ice again!
Ratings submitted by customers like you who bought this part.
This water filter (Whirlpool EveryDrop Refrigerator Water Filter, Single Turn Filter) purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the owner manual. Replacing this water filter may fix a noisy or leaking fridge, a fridge that is not dispensing water (or reduced flow rate), and an ice maker that is not making ice at all, or not making enough ice. This filter is white, sold individually and measures 8 inches by 3 inches in diameter. This water filter has been updated by the manufacturer. It may appear different but will still function the same. It is sold individually.
$104.16
In Stock
PartSelect Number PS11722130
Manufacturer Part Number EDR4RXD1
Replacing your Maytag Refrigerator Refrigerator Water Filter
Customer Repair Stories
Removing the existing filter by rotating as directed and then dislodging from 'docking' station proved difficult. Turns out, the old filter is under a bit of vacuum pressure and getting the unit to separate or release was a challenge.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate
... Read moremotions and a steady thought process on the problem helped disengage the darned old filter!
Read less
Jake from Novato, CA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
212 of 323 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
light on to order water filter
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Ratings submitted by customers like you who bought this part.
This water filter bypass cap, also known as a water filter bypass plug, is an authentic OEM part that replaces the regular water filter cartridge in refrigerators. It allows water to flow freely through the dispensing system when the filter is not present. The bypass can fail if it becomes clogged, cracked, or falls out of alignment. A faulty filter bypass will result in leaking, poor ice production, and difficulties dispensing water. You can find the filter bypass inside the refrigerator, near the water filter housing. Disconnect the water supply lines and remove the faulty bypass. Insert the new bypass in its place and reconnect the water supply lines.
$33.12
In Stock
PartSelect Number PS12731165
Manufacturer Part Number W11395888
Replacing your Maytag Refrigerator Refrigerator Water Filter Bypass
Customer Repair Stories
no water when under sink water filter installed
I called the installer of my filter unit and he told me that often, thhe fridge filter is the problem. Like magic it worked
Emi from Arlington, VA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
11 of 19 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Remove the water filter to install the bypass cap
Lower the filter bottom housing to gain access to the filter. Unscrew the filter and install the bypass cap. Secure the lower filter housing to the top assembly.
Ratings submitted by customers like you who bought this part.
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.
$124.35
In Stock
PartSelect Number PS2069865
Manufacturer Part Number 67006322
Replacing your Maytag Refrigerator Dual Water Valve
Customer Repair Stories
Ice Maker flooded our floor and then no Ice but we still had water
Reading the other repair stories really helped. Once we read a few and were able to find a schematic that was close to our model number on your website we realized we had a dual water valve where one solenoid-operated switch could stop working(No ICE but water) we located the dual valve on the interior back of the fridge and plugged the p
... Read moreart number into your website that showed us the replacement part number. It was pretty much unplug and replace. Thank-You! A+++++++++
Read less
Linda from Zeeland, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Was this instruction helpful to you?
Thank you for voting!
No ice from ice maker
Checked if the cube maker still worked by putting some water in - yes! Jumped the old valve to see if it would release water and nope. Replaced the valve and everything is great.
You supplied the right part, the repair was simple and everything is working. No expensive repairman.
Ratings submitted by customers like you who bought this part.
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light when your fridge door is open, and to make sure it is off when your refrigerator door is closed. The reason you would need to replace this part is if your light is not turning on when your door is open. For this repair, you will need a putty knife, and a small flat-blade screwdriver.
$27.70
In Stock
PartSelect Number PS12731166
Manufacturer Part Number W11396033
Replacing your Maytag Refrigerator Door Switch
Customer Repair Stories
Light switch rocker broke, disabling freezer internal light, water dispenser, and ice dispenser
Very simple. Matched female plugs with respective male color coded prong; pushed together then inserted unit in slot of freezer sidewall and rotated into position...job done.
Kenneth from Newton Grove, NC
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
while closing the door, the light switch fouled, resulting in the switch breaking
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
Kevin from Beckley, WV
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
59 of 90 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
You added 1 item to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
