This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This is a water inlet valve made for washing machines. This part is used to control the flow of water into the fill hose of the washing machine, to allow the washer to fill up with water. If your wash...
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is oper...
This is a shift actuator, and is designed for use in washing machines. This shift actuator is made to change the mode of the motor between spin and agitate, as well as communicate with the control boa...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sophia
December 28, 2023
The display of control panel is normal, first we set it to quick wash, then after pressing the start button, the machine started spinning and very loud noises came out, no water was filling, and then it kept spinning, then we pressed the power button, it showed cancelling cycle…but the machine won’t stop spinning.
From factory diagnostics, we ran the Calibration Cycle, and the water was filling in, machine was spinning, and after a while, the machine stopped and control panel displayed “F7E1 contact service.
How to fix this problem.
Thank you
For model number MVW6230HW2
Hello Sophia, thank you for getting in touch. According to our research, the error code F7E1 indicates a motor speed sensing error, the motor can not achieve the correct speed for the cycle selection. The sensor does not come separately. It comes along with the shift actuator, part number PS16221077. You may need to replace it to fix the issue. Glad to be of help!
What is the procedure to change the language from french to english on the display panel on a new model mvw6230hw2 washer
For model number MVW6230HW2
Hi Ron,
Thank you for your question. According to the Whirlpool website, press and hold the "Spin" and "Soil" button simultaneously for 10 seconds. A count down will be displayed on the console. Once the countdown has completed the unit will have successfully reset. Then select the language from the console. While on the language selection screen, press the "More Options" button to scroll through the options. To confirm or set the language press the "Start" button. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Arlene
May 17, 2023
F2E2 CODE ON WASHER
For model number MVW6230HW2
Hi Arlene, thank you for reaching out. The F2E2 error indicates the main control board is not getting the correct signal from the user interface. Turn off the power, remove the screws holding the inner door liner, remove the liner, and check all wire connections from the front interface and main control board. If an error still comes, we recommend checking the user interface panel, part number PS16221057. We hope this solves your issue!
Code F7E1 - replaced actuator . Does nothing but hum and code still comes up F7E1 . What should I try next?
For model number MVW6230HW2
Hello Scotty, thank you for contacting us. Based on our research, the error code F7E1 indicates a basket speed fault sensor issue. We would recommend checking the actuator, part number PS16221077, to solve the problem. The sensor is built into the actuator assembly. We hope this helps!
Hello my machine has been keeping up this awful noise during the wash cycle. My husband looked at it and he said the bearing were bad are going out. Do you sell these parts and does it come in a kit. its a Maytag Washer. Thanks
For model number MVW6230HW2
Hello Billie, thank you for getting in touch. Based on the description that you have provided, the issue seems to be with the transmission. We would recommend checking the transmission, part number PS16730207, to solve the problem. Glad to be of assistance!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
