This door strike is an authentic OEM replacement part that is compatible with various models of top-load washing machines. The door strike is located along the door frame, where it engages with the la...
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is...
This is an inlet valve for your washing machine. The inlet valve is an electrically controlled valve with a solenoid that opens and closes as needed, during the water filling cycle of the washing mach...
The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installat...
This agitator assembly is an authentic OEM part that is compatible with various models of washing machines. It consists of a central shaft with a series of fins attached to it. When the washer is oper...
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to...
This lid lock assembly is specially designed for top load washing machines. It is a genuine OEM part that is guaranteed to fit like the original. It includes the lid lock switch and the wiring harness...
This is an impact absorber, also known as a sound dampening pad, for washing machines. This sound dampening pad attaches to the top of your washing machine drum to reduce the severity and harshness of...
This clamp helps to prevent leaking by holding the end of water hose in place.
$10.85
In Stock
Questions And Answers for MVW7230HC0
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
November 30, 2021
What do you use to remove the water line in back of this washer
For model number MVW7230HC0
Hello James, Thank you for the question. The Water Fill Line just unscrews the from the Water Valve Port. We hope this helps!
Was this helpful?
Thank you for voting!
Jill
January 22, 2023
The washer won’t turn off like the count down timer not working
For model number MVW7230HC0
Hi Jill,
Thank you for your question. If your washer will not shut off, there are some parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the user control and display board, the lid switch assembly, and the water level hose. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
Hello Bill, thank you for contacting us. The model has a capacity of 5.2 cu ft. We hope this helps.
Was this helpful?
Thank you for voting!
Harry
May 22, 2023
I have gotten sediment in the washer from our well. I have since gotten hose screen, but do not know how to flush the it out.
can someone please help?
thank you
For model number MVW7230HC0
Hello Harry, thank you for contacting us. We have researched the model and would suggest running a complete drain cycle. To clean the drain hose, remove the clamp from the hose, and pull it out. Wash it manually with clean water. If this does not work, you may have to replace the drain hose, part number PS12578897. The sediments might also be stuck in the drain pump, affecting the proper flushing of the water. To get access to the drain pump, you may have to remove the back panel of the washer and remove the hoses attached to it with the hose clamps. We hope this information helps!
clothes in dryer no electricity to board cover locked
For model number MVW7230HC0
Hello Richard, thank you for contacting us. According to our research, we would recommend checking the power cord and the electrical outlet for any fault. If they are fine, then the control board, part number PS12745529, is most probably faulty and needs to be replaced. We hope this information helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Pushed in on door strike and rotated it counterclockwise, removed broken strike and installed new strike. NOTE: when removing the old strike (turning counterclockwise) it felt like it might break and/or was attached with an screw that I didn't see but it came right out.
Super easy repair, simply turn the broken door strike counterclockwise to remove; insert the new door strike into the slots and turn clockwise to lock into place.
