This is a high limit thermostat designed for microwaves, ranges and ovens. Made of plastic and metal, this thermostat is designed to open the electrical circuit for your appliance when it reaches a sp...
This rubber cushion is supplied by the original manufacturer and has a shaft approximately 1 inch long. The cushion acts as a layer of protection between the oven door and oven frame/cavity. It preven...
This energy regulator, more commonly known as a surface element control switch or burner switch is compatible with various models of Samsung ranges. It consists of the switch housing and a metal shaft...
This stainless steel wire rack is a sturdy platform for baking or roasting food, making sure heat circulates evenly. It measures approximately 7/16 inches by 24 3/4 inches and is usually found inside ...
This cooktop and frame assembly is a genuine OEM replacement part supplied by Samsung. It is specially made to fit with Samsung gas ranges. It includes a black frame made of stainless steel and a blac...
This genuine OEM left-threaded convection fan motor is responsible for spinning the fan blade, ensuring even circulation of hot air within your oven for consistent cooking. It is typically located beh...
The temperature sensor, also referred to as a thermostat, probe, or thermistor sensor, is responsible for measuring the temperature inside your oven. It is a platinum-resistance sensor with a resistan...
This hexagon nut cap, also known as a nut cover cap, is a nylon-insulated cylindrical cap with left-hand threads and a 4mm thread size, for counterclockwise tightening. It is sourced from the original...
$10.58
In Stock
Questions And Answers for NE58F9500SS
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
7 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
January 3, 2020
Do you carry the glass top for this 5.8 ft slide in range /Samsung
For model number NE58F9500SS
Hi David, sadly the requested part is discontinued, however you can contact the manufacturer to see if they have a suggested replacement. If they can provide you with a part number feel free to contact us back to see if we have the part in stock. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
Michel
February 17, 2022
Hello Mr.
my broil element comes red and stays on always and burns all, can you direct me to a solution.
For model number NE58F9500SS
Hello Michel, thank you for writing. The element staying on is a hazard and it should be replaced. The part number for the broil element is PartSelect Number PS8764904. Good luck with your repair.
Was this helpful?
Thank you for voting!
Bob
October 12, 2022
top front top burner when turned on goes to full power and cant turn it down (no adjustment)
For model number NE58F9500SS
Hi Bob, thank you for reaching out. According to our research on the model, the Burner Switch appears to be faulty and you may need to replace it with part number PS8764900. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
When the oven is turned on it makes a buzzing sound and like a fan blade is hitting somthing. Kinda like a til Tim noise. Any ideas?
For model number NE58F9500SS
Hello Duane, thank you for contacting us. We would recommend checking the fan blades, part number PS4241119, and part number PS4241125, and ensuring that there is nothing in their way. Also, check the fan motors, part number PS11720787, and part number PS11735747. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!
Hello Robert, thank you for contacting us. We have researched the model and would recommend checking the temperature sensor, part number PS4240744, and the thermostat, part number PS4226434. If both these parts are working fine, the bake element, part number PS4240824, might be damaged. We would suggest checking the element for continuity using a multimeter. If that does not help, the issue might be with the control board, part number PS12085911. We hope this helps!
This oven has two fans that counter rotate. One spins clockwise, the other counterclockwise. Because of this, the motors and the fan blades are different. The schematic shows the counter clockwise rotating fan with a right hand threaded shaft/nut on the bottom and the clockwise motor and fan with the left hand nut on the top. My range
... Read more had the motors in the exact opposite orientation, but the fan blades on the motors as shown on the schematic. The incorrect assembly at the factory (I bought new in the box, so I know this is the first repair) meant that nether fan blade was turning the correct direction. So do yourself a favor, be sure you’re buying the right motor (clockwise or counterclockwise) and be sure you put the right fan blade on the right motor. The Samsung motor ending in F is the counterclockwise motor that has the right hand threaded shaft the clockwise motor with the left hand threaded shaft ends in E.
I took off the back cover after I looked at youtube similar problems. Then removed the little thermostat and un hooked the 2 wires. I looked up the part and after is was delivered couple days later I connected the 2 wies and after putting the back cover on the oven was back to normal. Was such an easy repair and the part was only $11.
Slide out the stove. Unplug the electricity. Remove the back panel with a screwdriver. Then go inside the oven and remove the two Philips head screws holding the fan cover. Then remove the nut holding the fan. Note, it is a left handed nut, so turn it right to loosen it. Pull off the fan. Return to the back and remove the nut and two scr
... Read moreews that hold the fan. The fan slides right out. The only problem I had was that the electrical contacts on the new motor were wider than the original. I had to break the plastic so I could separate the wire leads, so that they would fit the new motor. Works like a charm. John
