Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jeff L - May 8, 2021
Verified Purchase
Easy fix stove
Part was exactly what I needed, easy to install and fixed the problem
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
one of the three elements did not work properly
The most difficult part was to remove leads from the old switch. I had to use long nose pliers. One by one I connected it to the new switch to prevent the wrong connection. After I removed the front cover, there was a lot of dirt, which I cleaned first and after replacing the switch and reinstalled the cover, I used the white DAP ca
... Read moreulking to prevent the cumulation of any impurities inside. Now the range works like new again!
Read less
Larry from PORTLAND, OR
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Curt
March 21, 2022
The triple burner turns on and off, but will not adjust temperature - i.e. if I turn any of the three sections to high and then try to turn it down to medium or low it will stay on high = therefore there is no simmer, just boil. Will this part solve the problem?
For model number JS750SF3SS
Hello Curt, Thank you for the question. This is normally caused by a faulty Switch that controls the Burner. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Roy
May 5, 2022
The Triple Element, the small element stopped working, is it the switch or the element?
For model number JS750DF3WW
Hi Roy,
Thank you for your question. To verify which part is causing the issue, you will need to test them. We have included a link that you may reference on how to check these parts. The part number listed under your model number for the switch is PS11771843. The part number listed for the triple element is PS8754838. Once you have determined the part you need, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
WB24X26408 infinite control switch for the 3 level/3 ring burner. How to test that switch to see if switch is good, or bad. That will let me know if it's the burner that's the problem, or not!
Thanks, Mark
For model number JS750DF3BB
Hello Mark, thank you for contacting us. You can test the switch, part number PS11771843, using a multimeter for continuity. When the switch is in the off position there should be no continuity between terminals. When the switch is closed a continuous path will exist of terminal L1 with H1A and H1B. A continuous path between terminal L2 and H2 will also be checked same. You can also test the burner with a multimeter for continuity. We hope this helps.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
