Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bill/Anna
March 12, 2018
When we press the start button - it only works part of the time - has a double-beep sound.
For model number MVWB835DC0
Hello Bill and Anna, Thank you for your inquiry. We would advise checking the lid latch first. You can test it with a multimeter. If that tests ok for continuity, then check the control board. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
CHERYL
October 5, 2023
IS THERE AWAY TO MAKE THE CONTROL BOARD OFF OF MODEL MVWX700XLO AND PUT ON MODEL MVWB835DW0, OR THE PUMP TO DRAIN
For model number MVWB835DWO
Hello Cheryl, thank you for reaching out to PartSelect. According to our research, the control board and drain pump of both the models are different and not compatible with each other. The compatible control board for model MVWB835DW0 is part number PS12070896, and compatible drain pump for model MVWB835DW0 is part number PS11756530. Glad to be of assistance!
Tub over fills with water. Checked hose from tub to circuit board it’s clear and not pinched. Showing codes E3 and F6. Ran a load of clothes this morning and it worked fine. But not sure if it will be ok in the future.
For model number MVWB835DW0
Hello Tom, thank you for getting in touch. According to our research, this error code indicates that there is a problem with the control panel assembly, part number PS11731606. You may need to replace it to fix the issue. Glad to be of help!
When i touch the sensor to start it won't come on. What could possibly be the problem.
For model number MVWB835DW0
Hello Shanita, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the wire harness between the control panel and the control board. If the wire harness is sound, then you may need to replace the control board, part number PS12070896, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.