Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
WINSTON M - January 7, 2023
Verified Purchase
Great customer service and part shipped f ast.
Part shipped fast and installed was easy.
★★★★★
★★★★★
John T - September 1, 2021
Verified Purchase
easy peasy
Always always always check with the greatest educational institution out there:
youtube.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace outside door glass
first remove lower drawer to access 3 1/4” door trim screws. Use nutdriver to remove 3 door trim screws on lower portion of door. Next, remove 2 door handle screws using small star(torch) wrench.. Carefully install new replacement glass inside outside door trim assembly by removing 2 of the inside door handle assembly screw
... Read mores using 1/4” nutdriver. Then carefully installing glass and reassembling all. Be Patient!! Take your time. This glass panel is extremely fragile!
Read less
Hoyt from WALTERBORO, SC
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel Lotinsky
December 29, 2017
I received the glass door for this oven from you guys but i can't find any installation instructions. Your website says you have them and i've been looking through your site for hours without finding them. Can you send them to me? Thank you
For model number JBS60DF3WW
Hello Samuel, Thank you for your inquiry. You need a flat blade screwdriver, a 1/4 inch nut driver, and a Torx 15 screw driver. Open the oven door, using the flat blade screw driver, open the hinge locks on both sides, then close the door partially and lift it off the hinges. Place the door with the handle side down on a workable surface. Using the torque 15 screw driver, back up two screws at the top of the door for approximately half an inch. Remove the 3 screws at the bottom trim with the 1/4 inch nut driver and lift the inner door off, then remove the side screws and take the bottom trim off. Carefully remove the old glass from the top trim, then slide the new glass into the top trim groove and the clips. Reattach the bottom trim and the side screws with the 1/4 inch nut driver. Take the inner door and pull the top screw sleeves down, then re-install the inner door and tighten the top screws with the torque 15 screwdriver, and the bottom trim screws with the 1/4 inch nut driver. Slide the door back onto the hinge slots, open the door and lock both stoppers. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.