Roper Refrigerator Brackets and Flanges

Videos!

Your Price

$19.46

Roper Refrigerator Control Bracket

★★★★★

117 Reviews

PartSelect Number PS11739027

Manufacturer Part Number WP2180226

This is a control bracket for your refrigerator, and may also be known as the dispenser control bracket. The function of this part is to hold the micro switches and the light socket in the freezer dispenser section in place. Its measurements are roughly 9 inches long and 5 inches high, and this model comes in white. The tools you will need in order to do this repair include a Phillips screw driver, a quarter-inch nut-driver, and a pair of needle-nose pliers. If your ice dispenser is not working properly, your bracket could be the problem.

Fixes these symptoms

Ice maker not making ice
Ice maker won’t dispense ice
Not dispensing water
See more...

Installation Instructions

BILL from BATESVILLE, MS

Front Door Ice Wouldn't Work And Air Going Into Freezer

Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks Read more...

Your Price

$5.37

Roper Refrigerator Fan Motor Retainer/Bracket

PartSelect Number PS11738921

Manufacturer Part Number WP2155590

Your Price

$11.16

Roper Refrigerator Kickplate Support Clip

★★★★★

5 Reviews

PartSelect Number PS11746875

Manufacturer Part Number WP944224

Sold individually.

Installation Instructions

Edward from Mequon, WI

Kickplate support Clips failed

Replacing the support clips was simple. But since the replacements were the same as the ones that had failed, I modified them by epoxying metal strips on each side of the fingers which had failed. Without this mod I think they would have failed very shortly like the original ones did. This added a half hour to the repair. Read more...

Your Price

$9.61

Roper Refrigerator Bracket, Dispenser

PartSelect Number PS11740253

Manufacturer Part Number WP2304673

Installation Instructions

Sean from Boise, ID

Water dispenser hose tip broken.

The part to fix this was a $50.00 part.
I purchased this Bracket Dispenser for $6.00 and it fit on My fridge perfectly. I just used the screw hole that was a little higher on the water dispenser. Simply cut off the broken end / or Buy a new Hose (Cost at Lowes about $6.00) guide hose along the bracket and use a socken set to reinstall the screw. Water is not squirting on people any more. Read more...

Your Price

$44.43

Roper Refrigerator Gate Support - Right Hand

PartSelect Number PS364082

Manufacturer Part Number 4357293

This gate support is designed to support the gate or fence on your vertical freezer. This part is designed for the right-hand side and differs from the left-hand side gate support. Be sure to note which side of your gate support is damaged before ordering this part. This product is sold individually. It is white in color and is made entirely of plastic. The gate support is approximately 6.5 inches in length and slightly less than an inch in width. This is an OEM part sourced directly from the manufacturer.