The Kenmore appliance brand is one of the most well-known and popular appliance brands. They offer a full line of home appliances including washers, dryers, dishwashers, freezers, fridges, ovens and more, all backed by today’s leading appliance manufacturers. If you order your Kenmore appliance parts from PartSelect.com, you can be sure you’re getting repair parts that are guaranteed to be of the same quality as your Kenmore appliance. We stock a complete line of Kenmore appliance parts, all ready to be ordered and shipped to you. We offer three flexible shipping options on all parts and as an added bonus, if you order an in stock part before 3pm eastern time Monday through Thursday, we’ll ship the part that very same day! Get your Kenmore appliance fixed fast and easy with Kenmore parts from PartSelect.com.
As homeowners, you rely on your appliances to work properly everyday, including your dishwasher. So when it breaks down and needs repair parts, the best place to get them is PartSelect.com. We make ordering dishwasher parts so easy with the step-by-step process on our website. Start by entering your dishwasher model number into the search field and browse our convenient parts list. Let our part diagrams, images and schematics show you exactly the part you need. If you’re having trouble figuring out the problem, let our free repair help figure it out for you. Once you’ve found the part you need, simply complete the order and then sit back and wait for the part to arrive. If you need any help, we make it easy to contact us by phone at 1-888-895-1535 or by email at customerservice@partselect.com. Order the dishwasher repair parts you need today from PartSelect.com!
PartSelect recently helped David of Amity, AR with this Whirlpool washing machine repair:
Crossed threaded plastic on old valve was leaking
Removed screws on top of machine to remove the control unit out of the way. Then used large regular screw driver to pry out the two clips that hold the back of the washer tight to the top frame. This allows the back to come away from the machine enough to get the water inlet valve free. Didn't have to remove the bolts at the bottom of the back of the machine (they were pretty rusty) Just removed the single screw holding the water inlet valve in place, slid it down and away from the back cover and could fish it out to the side and disconnect the hose (with plyers) and slide off electrical clips (make a note of which clip goes to which valve.) I removed the part first so I could make sure I was ordering the right one. When the part came (very promptly by the way) it went back together easy. Only question was regarding reinstalling the wires since I didn't mark which way they went. I knew which one went on the Hot and Cold but didn't know if it mattered which clips went on each terminal. Figuring it was AC guessed it didn't matter so put it together the way the connectors seemed to want to lie naturally. Put it together making sure no hoses or wires where pinched or rubbing against sharp edges. Replaced the rubber washers in the hoses and made sure the hose connectors turned freely (they had been rusted a bit and didn't turn on the hose freely and I think this was the start of the cross threading problem) This time the hoses went back on very easily, screwed them hand tight not forcing anything at any time (DIDN"T USE PLIERS!). Tried water and no more leaks. Washer filled faster also, think this was because the screens on the water valve were plugged. I'll have to remember to take the hoses off and make sure the screens are clear every couple years or so. If you are having slow fills, suggest you check this first before tearing in to the machine.
Read more...