Simplicity Tiller Seals and Gaskets

Simplicity Tiller Gasket-Fuel Tank

Simplicity Tiller Gasket-Intake

Simplicity Tiller Seal-Oil This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to your make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.

Simplicity Tiller Gasket-Cylinder Head The cylinder head gasket, also known just as the head gasket, is an OEM part sold individually. Grey in color, the head gasket provides a seal between the cylinder head and the engine block in your engine. Over time, it can become damaged due to wear. You may also need to replace this part any time you have had to remove the cylinder head for any other reason, as the gasket is a one time use. If you suspect your head gasket is damaged, perform a compression test. In doing so, you may hear air escaping from the head gasket area, and you will know this part is responsible. Symptoms that can be exhibited if this part needs replacing include an engine lacking power. Most of our customers thought this was a medium-difficulty repair. The repair requires a wrench or sockets and a torque wrench. When re-installing your head gasket, torque in an alternating patter to the manufacturer specifications for a proper seal.

Simplicity Tiller Gasket-Crkcse (.015 Thick)(Stand) The Crankcase Gasket (.015) is a manufacturer-certified part which is rated as being "Medium" difficulty to install. It will require a screwdriver, socket set, wrench set, and nut driver. It s used to provide an air seal between the crankcase and the cylinder assembly. If broken, there will be oil leaking, and the part should be replaced. Refer to your make, model and diagrams to check if this is the right part for you. This part is made of a composite of materials, and comes in gray.

Simplicity Tiller Gasket-Crankcase

Simplicity Tiller Gasket-Rocker Cover

Simplicity Tiller Gasket-Exhaust

Simplicity Tiller Seal The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil leaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

Simplicity Tiller Gasket Set-Engine