Whirlpool Cooktop Switches

Videos!

Your Price

$57.25

Whirlpool Cooktop Range Infinite Burner Switch - 8 Inch

★★★★★

21 Reviews

PartSelect Number PS11744487

Manufacturer Part Number WP7403P239-60

This infinite switch is for 8-inch range burners. When an element is unable to produce any heat on a modern oven, the problem may lie with the infinite switch. This switch is responsible for sending power to the surface elements. Check the element and terminal block to ensure they are working properly. If they are in working order, check the infinite switch at the control panel for any wires that have overheated, or broken terminals to or from the infinite switch. If the infinite switch is damaged or malfunctioning, it will need to be replaced. Remember to unplug your range before beginning this repair.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Dennis from Hagerstown, MD

The Burner was getting too hot and you could not regular the tempature

Moved the Appliance out unplugged it and removed the backing plate then Remove the Knob and unscrew the infinite switch then marking the 5 wires to know where the go on the new switch, removing and replaced it with the new one Read more...

Your Price

$52.83

Whirlpool Cooktop Surface Element Switch

★★★★★

3 Reviews

PartSelect Number PS12070192

Manufacturer Part Number W10900107

A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a knob on the user interface of the cooktop or stovetop and is adjustable by the user. This burner switch is compatible with various ranges and cooktops and is a genuine OEM part that is sold with all of the necessary hardware to secure it, such as the Philips-head and flat-head screws, brackets, bolts, washers, palnuts (also known as a push-on nut) and terminals. Over time, this switch can wear out or become faulty, leading to heating issues for your stovetop and cooktop, such as not heating, overheating, or staying at the same heat level. Depending on the orientation of your cooktop, you will need to install this switch with or without the bracket and palnut, so reference your user manual for that information when replacing this switch. You will need a screwdriver and set of pliers during the replacement and installation process, and simply need to follow the instruction manual included with this switch to correctly replace and rewire it.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Decker from GREAT NECK, NY

Old infinity switch on electric rangetop did not work correctly

Lifted range top, disconnected and labled wires from old switch, removed old switch, replaced wires on new switch, installed new switch.
NOTE: Local appliance store informed me that the electric cooktop was too old and that a replacement switch was not available and wanted to sell me a new cooktop for $795!
I found the switch on PartSelect and repaired the cooktop. Total cost... UNDER THIRTY DOLLARS!! Read more...

Videos!

Your Price

$94.08

Whirlpool Cooktop Inifinite Switch

★★★★★

5 Reviews

PartSelect Number PS11747252

Manufacturer Part Number WP9759474

This switch is used for the right rear and left front burner.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Barry from Wichita Falls, TX

A heat control switch was broken.

I first turned off the power to the stovetop at the breaker box, disconnected the power supply wires, removed the stovetop from the counter, placed the stovetop on a towel on the kitchen table, removed the screws connecting the glass top to the base, removed the glass top, removed additional screws holding the sheetmetal housing for the switches, opened this area and located the faulty switch, disconnected the wires leading to the faulty switch, connected the wires to the new switch, secured the switch to the sheetmetal housing and put the unit back together. It was not a difficult repair, just took a little time. Read more...

Your Price

$102.52

Whirlpool Cooktop Dual Surface Element Control Switch

★★★★★

1 Review

PartSelect Number PS11752578

Manufacturer Part Number WPW10312185

Your Price

$123.75

Whirlpool Cooktop Speed Control Switch

★★★★★

2 Reviews

PartSelect Number PS11742668

Manufacturer Part Number WP4456836

Your Price

$204.65

Whirlpool Cooktop Inifinite Switch

★★★★★

1 Review

PartSelect Number PS11750742

Manufacturer Part Number WPW10234425

Installation Instructions

Craig from Fairfax Station, VA

Inop burner switch

Remove and replace. Check. Read more...

Your Price

$53.71

Whirlpool Cooktop Spark Ignition Valve Switch

★★★★★

1 Review

PartSelect Number PS11757574

Manufacturer Part Number WPY704512

This spark ignition valve switch is an inch and a half long. It is a white switch with a black cam. Sold individually.

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Max from Plano, TX

The right rear burner ignition switch malfunctioned.

Repair is simple as long as you TURN OFF THE CIRCUIT BREAKER first. After that, take off the cover over the switches (pull knobs off, remove 2 screws and lift off the cover), pull the bad switch straight up off the gas valve, pull the two wires off the switch, plug them back onto the new switch, place it back over the gas valve stem, reassimble the cover and knobs, turn back on the circuit breaker, and verify that ignition switch works. Not a hard repair. (HINT: while you are waiting on the replacement part, you can light the bad burner by turning on the opposite burner ignition switch and using that "spark" to light the other burner.) Read more...

Your Price

$113.44

Whirlpool Cooktop Igniter Switches with Harness

★★★★★

3 Reviews

PartSelect Number PS11742674

Manufacturer Part Number WP4456901

This part includes 5 ignition switches and the wire harness. You can not purchase these separately.

Installation Instructions

Raymundo from Cerritos, CA

I had a faulty wiring on the igniter switches.

replaced the set of igniter switches I order from Partselect .com. Read more...

Your Price

$121.49

Whirlpool Cooktop Surface Element Switch Kit

★★★★★

4 Reviews

PartSelect Number PS972602

Manufacturer Part Number 8203534

This switch controls the stove top surface burner.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Scott from Huntsville, AL

2 burner control - "Large" = "Large", "Small" = "Large"

Well, I found the two screws that held the cook top in place and backed them out. Pulled the cook top out of the counter and took out a bazillion little sheet metal screws that held the cover in place. The controllers were grouped in a cluster of four, and the "Front Left" was easy to spot. I pulled the wires off one-by-one and noted the marking on the old controller, and noted the markings on the new controller, especially the translator table that came with the new controller - the old and new controllers are a bit different. Then screwed the new controller in and tested the cook top - worked fine. Then I changed the hard wiring to the power source (a bad job originally) to a three prong plug and socket arrangement. Put it all back together and was back in business - a "piece of cake" repair. A week later "somebody" dropped "something" onto the corner of the glass and chipped out a little chunk of glass. Oh well, fun to fix anyway! Read more...