Whirlpool Dryer Latches

Whirlpool Appliance Parts

Popular Whirlpool Dryer Latches

Your Price
$5.04
  In Stock
Whirlpool Dryer Door Catch Kit
★★★★★
★★★★★
125 Reviews
PartSelect Number PS334230
Manufacturer Part Number 279570
This part replaces your appliances latch (Door Latch Kit, Door Catch, Dryer Door Latch Kit). On your appliance you will find both a strike and a catch. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep your dryer door closed. The catch holds the door strike to keep the door closed during the drying cycle. If the door does not latch closed, you won’t be able to start a drying cycle. If this part is malfunctioning, you may not be able to open or close your door. In some instances, it may seem like your door is closing, but if it is not latching properly you won’t be able to start your drying cycle. You should replace this part as soon as it’s malfunctioning. Your dryer may run even though the latch is malfunctioning, but it is unsafe if the dryer continues to run while the door is open. This replacement part features 1 door latch kit which includes 2 strikes, 3 catches, and a set of instructions. This model is constructed of plastic and metal, and comes in white/silver.
Fixes these symptoms
  • Door Pops Open
  • Door won’t close
  • Lid or door won’t close
  • See more...
Installation Instructions
Terri from Saint Augustine, FL
Door Catch part had fallen out,/ was missing
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source. Read more...
Your Price
$27.21
  In Stock
Whirlpool Dryer Door Catch
★★★★★
★★★★★
18 Reviews
PartSelect Number PS11756723
Manufacturer Part Number WPW10610880
This door catch Is an authentic OEM replacement part that is designed to fit with dryers. It is responsible for keeping the dryer door securely closed while it is running. When the door is closed, the catch engages with the door strike and snaps into place, holding the door shut until the drying cycle is completed. Over time the catch may become corroded, worn down, or damaged, or dislodged from frequent use and hard impact. If the catch is faulty, the door may be unable to remain shut. This can lead to heat loss, injury, and potential damage to the dryer itself. If the catch is no longer functional, it is recommended to replace it as soon as possible and avoid using your dryer until the repair is complete.
Fixes these symptoms
Installation Instructions
Rosemary from RILEY, MI
Catch was broken
Removed the plastic guard. Snapped the catch in place and replaced the guard Read more...
Your Price
$7.37
  In Stock
Whirlpool Dryer Door Catch
★★★★★
★★★★★
104 Reviews
PartSelect Number PS11748369
Manufacturer Part Number WPW10111905
This replacement door catch is for your dryer door. If the catch is broken and the door will not stay shut, the dryer may not turn on. Use a putty knife to pop out the existing door catch by the locking tabs, and insert the new one. Make sure to unplug the dryer before beginning this repair.
Fixes these symptoms
Installation Instructions
Tammy from Clute, TX
Dryer door catch broken
After a few years of slamming the dryer door (at least that is what my husband says), the catch on the dryer door broke. Using pliers (I used needle nose) squeeze the outer edges of the catch together (vertically). With it compressed, it should slide out easily. My husband had jacked with ours prior to the repair, so the broken piece in the door was actually sideways and would not fit through the hole. Using a screwdriver, I pushed that piece into the door (it lives in the door somewhere now). I was then able to slide out the rest of the old catch. Compress the new catch and insert it into the hole in the door. Push it in until it clicks into place. DONE! Happy Drying! Read more...
Your Price
$8.54
  In Stock
Whirlpool Dryer Door Strike
★★★★★
★★★★★
8 Reviews
PartSelect Number PS266893
Manufacturer Part Number WE1X1192
TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.
Fixes these symptoms
Installation Instructions
robert from mount joy, PA
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min. Read more...
Your Price
$11.38
  In Stock
Whirlpool Dryer Door Latch
★★★★★
★★★★★
14 Reviews
PartSelect Number PS3502777
Manufacturer Part Number WE1M1011
This door latch is designed for your dryer, and is mounted to the dryer frame. The door latch holds the door of your dryer closed while the machine is operating. If your dryer door is not catching on the door strike, and will not stay closed, you may need to replace the door latch. This part is square in shape, and is approximately 3/4-inch in length, by 3/4-inch in width. The part is made of white plastic with a metal tab. To access the door latch, you will need to remove the top and side panels on your dryer. To complete this repair, simply pop the damaged door latch out of position, and snap the new one into place.
Fixes these symptoms
Installation Instructions
robert from mount joy, PA
dryer door wont stay shut
pulled out door striker anddoor latch out with pliers and just pushed in new parts. works like new in under a min. Read more...
Your Price
$9.76
  In Stock
Whirlpool Dryer Door Catch
★★★★★
★★★★★
3 Reviews
PartSelect Number PS11741434
Manufacturer Part Number WP3389441
This white female door catch is attached to the dryer door.
Fixes these symptoms
Installation Instructions
tony from prineville, OR
Top door catch assembly had broken
It was so easy, that my wife did it the day we got the part before I got home from work. She wedged it out with a flat head screw driver and then pushed the new door catch assembly in with her thumb. Pretty simple, thanks for having parts like this available to the public! Read more...
Your Price
$8.00
  In Stock
Whirlpool Dryer Door Switch Actuator Spring/Lever
★★★★★
★★★★★
27 Reviews
PartSelect Number PS11743767
Manufacturer Part Number WP691581
This black actuator spring with white rubber tip is used for both dryer doors and washer lids.
Fixes these symptoms
Installation Instructions
Paul from Vero Beach, FL
door switch actuator spring broken
-unplugged appliance
-removed lint trap
-removed 2 lint trap shute screws with phillips screwdriver
-popped open top of appliance with standard screwdriver by applying pressure at each front corner so that it could be tilted up to access actuator switch on right side of door
-removed 2 actuator switch screws, located on upper right side of laundry door, with phillips screwdriver (screws are accessed from outside of door frame not through appliance top).
-discarded broken actuator spring (accessed from open appliance top)
-replaced new actuator spring
-replaced 2 actuator switch screws
-closed top
-replaced 2 lint trap shute screws
-replaced lint trap
-plugged in appliance
-tested for operation
-kissed by happy wife
Read more...
Your Price
$32.34
  In Stock
Whirlpool Dryer Door Catch Kit
★★★★★
★★★★★
20 Reviews
PartSelect Number PS2162263
Manufacturer Part Number LA-1003
This door catch kit is designed for use in dryers. This is an authentic OEM replacement part. This catch assembly ensures the door of your appliance will close, and remain closed. It allows your appliance to both start and complete a full drying cycle. There are two pieces included in this kit, one catch, and one strike. You open and close the door on such a regular basis that this mechanism can wear out. It is a fairly common part to replace. You will need to remove the door of your dryer to install the replacement catch assembly.
Fixes these symptoms
Installation Instructions
Paul from Mt. Pleasant, SC
catch mounted on door broke
The door had always opened with the wrong swing and it wasn't til I needed to repair this that I noticed you could change the swing. I changed the swing of the door and then noticed that the clip was included on both sides so i did not need to repair the catch. I still have the part so when it breaks again, I can just pop it in. Read more...
Your Price
$13.72
  In Stock
Whirlpool Dryer Door Latch Kit
★★★★★
★★★★★
15 Reviews
PartSelect Number PS2029855
Manufacturer Part Number 306436
This is a door latch kit, but you may also know it as a door catch kit. It is designed for your dryer. This part helps hold the door shut on your appliance. This dryer door latch kit comes in two pieces: a door latch, and a door strike or clip. Both parts are a beige white color and made entirely of plastic. Together they are 2 inches wide, 1 inch long, and about 1 inch high. To replace the door latch kit, you will need a pair of needle-nose pliers and a number 2 Phillips screwdriver.
Fixes these symptoms
Installation Instructions
gerry from west covina,, CA
noisy rollers, broken latch
first, I unplug the power supply of the dryer then I removed the two screws at the bottom of the dryer then pulled out the front part of the dryer,unplugged the blue & yellow wire for the on/off switch for the door,at the back of the dryer I unscrew the pannel for the belt,disconect the belt,and I unscrew the four screws on both side of the front pannel to remove the front cover of the drum. Once I removed the front cover of the drum I can now remove the drum itself to access the drum support roller. I unscrew the rollers then replace it with the new once. It was an easy job.
Thank you.
Read more...
Your Price
$12.85
  In Stock
Whirlpool Dryer STRIKE PLATE W/STRK HOLE
PartSelect Number PS1017595
Manufacturer Part Number WE1M570
Fixes these symptoms

Related Whirlpool Dryer Parts