Whirlpool Microwave Oven Combo Switches

Your Price

$52.83

Whirlpool Microwave Oven Combo Surface Element Switch

★★★★★

3 Reviews

PartSelect Number PS12070192

Manufacturer Part Number W10900107

A surface element switch, also known as a burner/infinite switch, is a device used to control and regulate the heat output of the burners on a stovetop or cooktop. This switch is controlled with a knob on the user interface of the cooktop or stovetop and is adjustable by the user. This burner switch is compatible with various ranges and cooktops and is a genuine OEM part that is sold with all of the necessary hardware to secure it, such as the Philips-head and flat-head screws, brackets, bolts, washers, palnuts (also known as a push-on nut) and terminals. Over time, this switch can wear out or become faulty, leading to heating issues for your stovetop and cooktop, such as not heating, overheating, or staying at the same heat level. Depending on the orientation of your cooktop, you will need to install this switch with or without the bracket and palnut, so reference your user manual for that information when replacing this switch. You will need a screwdriver and set of pliers during the replacement and installation process, and simply need to follow the instruction manual included with this switch to correctly replace and rewire it.

Fixes these symptoms

Element will not heat
See more...

Installation Instructions

Decker from GREAT NECK, NY

Old infinity switch on electric rangetop did not work correctly

Lifted range top, disconnected and labled wires from old switch, removed old switch, replaced wires on new switch, installed new switch.
NOTE: Local appliance store informed me that the electric cooktop was too old and that a replacement switch was not available and wanted to sell me a new cooktop for $795!
I found the switch on PartSelect and repaired the cooktop. Total cost... UNDER THIRTY DOLLARS!! Read more...

Your Price

$44.80

Whirlpool Microwave Oven Combo Door Switch - 250V

★★★★★

2 Reviews

PartSelect Number PS2338920

Manufacturer Part Number W10211972

This door switch (Primary and Secondary) keeps the microwave from running when the door is open. NOTE: Two switches required. Sold individually.

Fixes these symptoms

Won’t turn on
See more...

Installation Instructions

E G from SILVERDALE, WA

The display kept asking me to close the door, even though the door was closed. The interior light stayed on.

I used a Google search to show how to access the area behind the front panel. There was a folded paper copy with a schematic and wiring diagram in that space.Then I used a multi-meter to determine which of the THREE micro-switches was causing the problem. I called your help line and ordered a replacement switch. The switch was delayed in transit so your agent credited me with the cost of shipping.

When the part arrived, it had three terminals instead of two as shown in the on-line picture but that did not cause any difficulty in using it. It took about 20 minutes to remove and replace the old switch.

All seems to be working well now.

Finding which of the THREE switches was the problem was the most difficult part of the repair. All three "clicked" but the defective one did not click as easily. It needed to be depressed more than the door latch can would provide. Old age? Read more...

Your Price

$85.94

Whirlpool Microwave Oven Combo Door Interlock Switch Kit

★★★★★

3 Reviews

PartSelect Number PS373050

Manufacturer Part Number 4392027

This part is a genuine manufacturer door interlock switch kit, also known as primary micro switch or microwave switch kit, for a microwave. The function of this part is to sense when the door of the microwave is open or closed. If the part is defective, the microwave will not start or will start when door is open. This kit contains two 15 Amp, 125/250 Volt switches with 3/16 inch terminals. Be sure to disconnect power to microwave before replacing part. Use extreme caution when replacing microwave parts, as high-voltage capacitors can retain an electrical charge when unplugged. NOTE: This kit includes 2 single pole, double throw (SPDT) micro switches. As per the manufacture for the secondary interlock switch order part # 56001100.

Fixes these symptoms

Doesn’t shut off
No heat
Won’t turn on
See more...

Installation Instructions

Robert from Bainbridge Island, WA

Microwave worked intermittently depending on how door was closed

Remove top grille (2 screws), undo control panel (1 screw). Tilt down control panel, switches are on the left. There are actually three switches that are involved with the door, two horizontally mounted, one vertically mounted. This would be an EASY REPAIR, but it took me a while to figure out which of the three switches was bad, and also took a while to figure out that there is a plastic rod that inserts through the hole in the switch body. Once i figured this out went like a breeze. Lower horizontal switch was the bad one, but since the kit came with two switches i went ahead and replaced the upper horizontal one as well. IT appears that the horizontal switches are probably more likely to fail than the vertical switch based on the position of the switch and force angles. Works great now! Read more...

Your Price

$72.25

Whirlpool Microwave Oven Combo Exhaust Switch - Black

★★★★★

3 Reviews

PartSelect Number PS11740768

Manufacturer Part Number WP3147265

Fixes these symptoms

Will Not Start
See more...

Installation Instructions

Al from Abbeville, AL

The switch on the exhaust fan for the grill part of the stove went bad. I found the part on your site easily , ordered it and got it within 4 days.

I simply looked at the new switch , to see how it fastened in the stove. It had plastic clips that were easily depressed to allow the swithch to be removed. I removed it , (after turning the circuit breaker off to the stove) removed the three wires , and replace them on the new switch and simply pushed it in the space. It snapped in place , and the job was done . Works great! Read more...