Maytag Dryer Filters

Videos!

Your Price

$61.46

Maytag Dryer Lint Filter

★★★★★

102 Reviews

PartSelect Number PS1491676

Manufacturer Part Number W10120998

The filter collects lint during the drying cycle. This filter is 12 1/2 inches wide and 10 1/2 inches deep. Replacing the lint filter is an easy repair which requires no tools. When replacing the lint filter, check the filter slot for a buildup of lint, which can be a fire hazard. Continue to check often to make sure the filter and slot are both cleared of lint.

Fixes these symptoms

Door won’t close
Marks left on clothes
See more...

Installation Instructions

JEFFREY from FALL RIVER, MA

felt strip came off lint screen

ordered new lint screen, removed old screen, inserted new screen. Read more...

Videos!

Your Price

$46.50

Maytag Dryer Lint Screen Filter

★★★★★

145 Reviews

PartSelect Number PS11757278

Manufacturer Part Number WPW10717210

This manufacturer-certified dryer lint filter is used to collect lint during the dryer cycle, to prevent damage to the machine and to prevent lint from sticking to clothes. This model comes in white and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. Check your user manual and model number to see if this is the right part for you. Make sure you empty the lint filter after every use of the dryer and check the filter slot for an excess buildup of lint, which can shorten the life of your filter and be a fire hazard. The screen is approximately 20 inches in length, not including the handle, and around 8.5 inches wide.

Installation Instructions

Evelyn from JACKSONVILLE, FL

Needed a new lint filter

Took the old one out, replaced it with new one. Read more...

Videos!

Your Price

$44.63

Maytag Dryer Lint Filter

★★★★★

78 Reviews

PartSelect Number PS11741075

Manufacturer Part Number WP33001808

This is a replacement lint filter for your dryer. The lint filter is approximately 12 1/2 inches in length. Simply remove the existing filter and replace it with the new one. Check for an excess buildup of lint when changing the filter, and clean it after every use.

Fixes these symptoms

Touchpad does not respond
See more...

Installation Instructions

Anthony from DeKalb, IL

Lint into venting area.

Removal of old lint collector and replace with new one. Read more...

Videos!

Your Price

$25.05

Maytag Dryer Lint Filter

★★★★★

71 Reviews

PartSelect Number PS11741039

Manufacturer Part Number WP33001003

This lint filter is a genuine OEM replacement filter for your dryer. Replacing it is easy as it just slides in like your normal filter. Make sure to check the filter slot for excess buildup of lint, and clean it out after every use of the dryer.

Fixes these symptoms

Noisy
See more...

Installation Instructions

Raymond from West Bend, WI

electric dryer was rumbling - wheel or belt?

Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through. Put the tumbler back on and reached back with both hands to thread it. Took a half dozen tries until I was sure it was seated correctly and not twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower wheel was the cause of the rumble. Belt didn't seem worn but replaced anyhow. Read more...

Your Price

$62.56

Maytag Dryer Lint Filter

★★★★★

22 Reviews

PartSelect Number PS11731421

Manufacturer Part Number W10859086

This is the replacement lint screen for your dryer. It is made of plastic and is approximately 14 inches by 9 inches. The lint screen traps unwanted lint and debris so your dryer can effectively dry your clothes. If the old lint screen is cracked or clogged, the dryer takes too long to dry, or excessive lint is accumulating inside the dryer or its venting, you may need to replace it. Simply remove the old, damaged filter, and replace it with the new one.

Installation Instructions

David from RENO, NV

Original lint filter too warped to be used

I took out the old filter, put it into the recycle bin and dropped in the new filter. I was done. Read more...

Your Price

$69.20

Maytag Dryer Lint Filter

★★★★★

11 Reviews

PartSelect Number PS11755878

Manufacturer Part Number WPW10516085

NOTE: As per manufacture the felt seal is no longer needed with the lint filter.

Installation Instructions

Tammy from JACKSONVILLE, FL

The screen in the lint filter was broken

Since it was a dryer filter, it just had to be put in the dryer. Works GREAT!! Read more...

Videos!

Your Price

$74.53

Maytag Dryer Assembly, Lint Screen

★★★★★

23 Reviews

PartSelect Number PS11746639

Manufacturer Part Number WP8572270

Also known as Lint Screen. Handle is white in color.

Your Price

$48.71

Maytag Dryer Lint Filter

★★★★★

15 Reviews

PartSelect Number PS11738127

Manufacturer Part Number W10874409

This lint filter screen has a white handle. This filter collects lint as it passes through the dryer vent.

Installation Instructions

Katharine from Palm Springs, CA

The lint filter was seriously damaged

After the new filter arrived, I took the old filter out, put the newe one in. No tools, no difficulty at all. Actually, the really difficult part of this entire episode was finding the model number on the dryer. It was on the underside of the door. Read more...

Videos!

Your Price

$73.42

Maytag Dryer Lint Filter

★★★★★

23 Reviews

PartSelect Number PS11741919

Manufacturer Part Number WP37001142

Note: This part no longer comes with the felt seal. This filter collects lint as it passes through the dryer vent.

Fixes these symptoms

Door won’t close
Marks left on clothes
Noisy
See more...

Installation Instructions

Tim from South Glens Falls, NY

The Felt Gasket between drum and door ripped, vent manifold from Dryer to fan and lint screen broken

I pulled the bottom panel and the door panel to replace the manifold and felt gasket around the drum. I removed old gasket very easily, it peeled right off. I use brake cleaning fluid (Spray Can from Auto Zone about $1.45) to remove old glue. Used spray contact cement (Elmer's about 4.50 at Ace) and sprayed the panel and gasket surfaces and let dry. I then applied a 2nd coat and let get "tacky" and installed the gasket. You will need an extra set of hands to hold the gasket in place while you stretch it over the the panel. The vent manifold is held in place with 3 phillips screws and was installed in about 10 minutes. The only gripe I had was in the Parts-Select illustrated breakdown they don't tell you the lint screen comes with the manifold assembly, so I bought one of them too. Now have an extra lint screen Read more...